sly Posted April 24, 2011 Report Share Posted April 24, 2011 Here's my 1016 finally done, But she's never done until she gets a gen. dial & a 1570. I have a gen dial offer from a well respected member when it comes to 1016 and I have a spare 1570 but other projects are occupying my time and money as of now. As usual forgive my iphone pics. Yuki dial & hands Clarks crystal Gen. 1601 case Gen. crown & tube Gen. spec custom 1016 bezel ETA 2846 Link to comment Share on other sites More sharing options...
lhooq Posted April 24, 2011 Report Share Posted April 24, 2011 Nice Explorer, sly! If I could recommend one easy change... You might want to swap out those Submariner-spec springbars for the shorter ones found on the 1016s. Ideally, the tips should be somewhat recessed, rather than flush with the case sides. Link to comment Share on other sites More sharing options...
sly Posted April 24, 2011 Author Report Share Posted April 24, 2011 Thanks M, Where can i find those spring bars. Also, I had to get the dremel out to fit the endlinks. Is there a correct endlink that i should use or is it because I have 1601 case. Thanks Sly Link to comment Share on other sites More sharing options...
praetor Posted April 24, 2011 Report Share Posted April 24, 2011 nice job. I wonder if you can actually drill the lugholes hmm. Link to comment Share on other sites More sharing options...
sly Posted April 24, 2011 Author Report Share Posted April 24, 2011 nice job. I wonder if you can actually drill the lugholes hmm. Those lug holes were drilled to accept 2mm spring bars. Link to comment Share on other sites More sharing options...
freddy333 Posted April 24, 2011 Report Share Posted April 24, 2011 Great looker. Link to comment Share on other sites More sharing options...
lhooq Posted April 24, 2011 Report Share Posted April 24, 2011 Thanks M, Where can i find those spring bars. Also, I had to get the dremel out to fit the endlinks. Is there a correct endlink that i should use or is it because I have 1601 case. In the past I've used an Australian supplier of "genuine" 1016 springbars (i.e. #23-9293, rather than the Submariner's #23-9291). Expensive, but they're the only ones I can find with the correctly wide pivots. Yuki carries a cheaper set, but with narrower pivots; they would have fit undrilled 1601 holes. The 80 endlinks of my Yuki 7206 were a very tight, flush fit on my 1601 case. They didn't need to be bent, trimmed, or modified in any way. So the x80s work, but you may want to try endlinks from the x58 series. Link to comment Share on other sites More sharing options...
superlative Posted April 25, 2011 Report Share Posted April 25, 2011 What's up with the Yuki Explorer dials and that "floating" 6? Link to comment Share on other sites More sharing options...
Original Scope Posted April 25, 2011 Report Share Posted April 25, 2011 Nice one Sly. You make me miss that case! Link to comment Share on other sites More sharing options...
jmb Posted April 25, 2011 Report Share Posted April 25, 2011 M, I had hit the ends of these with the grinder but I guess I needed to take off more? Link to comment Share on other sites More sharing options...
lhooq Posted April 25, 2011 Report Share Posted April 25, 2011 M, I had hit the ends of these with the grinder but I guess I needed to take off more? By my measurements, the 1016-spec bars are 2mm shorter than the Sub springbar i.e. 23.2mm vs 25.2mm. The tips should be barely visible from most angles. Gen: Link to comment Share on other sites More sharing options...
jmb Posted April 26, 2011 Report Share Posted April 26, 2011 Great... Link to comment Share on other sites More sharing options...
Ronin Posted April 26, 2011 Report Share Posted April 26, 2011 I should do this to the 1601 case I have sitting in my parts drawer. Very nice. Link to comment Share on other sites More sharing options...
praetor Posted April 26, 2011 Report Share Posted April 26, 2011 more reasons why you should immediately convert your 1601: 1) It's the literary James Bond watch 2) Matt Damon wears one Link to comment Share on other sites More sharing options...
lhooq Posted April 26, 2011 Report Share Posted April 26, 2011 What's up with the Yuki Explorer dials and that "floating" 6? It's not just the 6. The 3 and 9 are also being sucked in by the gravitational pull of the enlarged ROLEX text! What sucks is that Yuki used to have some of the best Explorer dials on the market, but then they changed suppliers about 1-2 years ago. more reasons why you should immediately convert your 1601: 1) It's the literary James Bond watch2) Matt Damon wears one 1. When I hear James Bond in connection to the Explorer, I always think of the online debates involving the unpleasant Dell Deaton. Ugh. 2. MAAATTT DAAAMON!!! Link to comment Share on other sites More sharing options...
praetor Posted April 26, 2011 Report Share Posted April 26, 2011 well I've only read about how it's connected to James Bond online, so it probably came from the same source. I kind of suspect that Rolex was only adopted in Ian Fleming's much later novels, when fans probably convince him that Rolex was the brand for James bond. Regardless, it was also Ian Fleming's personal watch that he bought in 1962 and I would want one because it was Ian's choice. Since it was bought it in 1962, it should have a gilt dial hmm... Link to comment Share on other sites More sharing options...
lhooq Posted April 26, 2011 Report Share Posted April 26, 2011 well I've only read about how it's connected to James Bond online, so it probably came from the same source. I kind of suspect that Rolex was only adopted in Ian Fleming's much later novels, when fans probably convince him that Rolex was the brand for James bond. Regardless, it was also Ian Fleming's personal watch that he bought in 1962 and I would want one because it was Ian's choice. Since it was bought it in 1962, it should have a gilt dial hmm... I'm inclined to believe that Sir Ian the literary James Bond did have a 1016 or earlier model Explorer. However... My problem with Deaton is how he conducts himself on the forums. I don't see anything wrong with obsessing over what is ultimately trivia, but DD acts like a fanatical guardian of secret knowledge. If questioned, he dodges, obfuscates, and asks for threads to be locked. When cornered, he gets vicious and personal, all while bludgeoning readers with the fact that HIS articles were published in magazines. DD seems to prize "Firsties!" and his self-appointed Bond Watch Expert status above all else, even if it means pissing off scores of people who thought they were just having a friendly discussion over what is -I stress it again- trivia. You'd think he'd single-handedly developed the polio vaccine... Apologies to sly for the off-topic rant! Link to comment Share on other sites More sharing options...
Ronin Posted April 26, 2011 Report Share Posted April 26, 2011 What crystal did you use? Just realized my 1601 has a Cyclops on it... P.S. Jon Hamm / Don Draper also sports and Explorer in Season 4 of Mad Men: http://rolexblog.blogspot.com/2010/07/rolex-super-coolness-jon-hamm-mad-men.html Link to comment Share on other sites More sharing options...
sly Posted April 26, 2011 Author Report Share Posted April 26, 2011 Clarks T-22 if I'm not mistaken Link to comment Share on other sites More sharing options...
woof* Posted April 26, 2011 Report Share Posted April 26, 2011 Beautiful watch sly! May I ask where you got a gen case, and appx what did it set you back? Link to comment Share on other sites More sharing options...
sly Posted April 26, 2011 Author Report Share Posted April 26, 2011 Beautiful watch sly! May I ask where you got a gen case, and appx what did it set you back? Search 1601 case on the bay, I got mine from another member here who gave me a very good deal Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now