asciwhite Posted January 3, 2013 Report Share Posted January 3, 2013 My lord never saw a Rolex look so big! Well take it from where it comes President of big Wrist Club. Now all you skinny wrist guys send me your unneeded links !LOL I want to arm wrestle for watches double or nothing! My wrist might be skinny but the rest of me aren`t 4 Link to comment Share on other sites More sharing options...
Mike on a bike Posted January 3, 2013 Report Share Posted January 3, 2013 OK White you win!!! Fifteen years ago would have given you a run for your money............. Link to comment Share on other sites More sharing options...
Cromag Posted January 8, 2013 Author Report Share Posted January 8, 2013 (edited) Gen Anonimo Millemetri 42mm on 6.3" wrist Edited January 8, 2013 by Cromag Link to comment Share on other sites More sharing options...
martijnp Posted January 19, 2013 Report Share Posted January 19, 2013 Great topic, my wristsize is 6,3 in so this topic is very helpfull! Breitling Transocean 42mm on 6,3in wrist Hublot Classic Fusion Chrono 40mm on 6,3 in wrist Link to comment Share on other sites More sharing options...
seangoh Posted January 19, 2013 Report Share Posted January 19, 2013 i have 6-6.2inch wrists, skinniest ever skinner than many girls. even 40mm looks large on me. proper sucks. but i think there are some nice ones i can pull off without looking overly ridiculous (plus they all appear bigger in pics, smaller in real life) 38mm 38mm 40mm 41mm i think wow, looks great, are these all gens? Link to comment Share on other sites More sharing options...
kasper618 Posted February 9, 2013 Report Share Posted February 9, 2013 Here's a few pams, and a 50mm Vostok Europe: Anchar, on my super small 6" on a good day, wrist. I swear I eat! I can put some food down! 1 Link to comment Share on other sites More sharing options...
Mike on a bike Posted February 9, 2013 Report Share Posted February 9, 2013 Kasper like Vostok but at 50 tough to wear ,I do not even go there. To be honest 47mm tops and then if it over 16mm thick I stay away. Wish I could wear Rolex surprised you guys are not inclined to go that way. Link to comment Share on other sites More sharing options...
spitfire Posted February 9, 2013 Report Share Posted February 9, 2013 Like this thread a lot My smuf-like wrist.. Clocking in at 6" (15,5cm) Pam 111 h-factory Love it to bits... Dreaming of a DSSD... :0) Link to comment Share on other sites More sharing options...
kasper618 Posted February 9, 2013 Report Share Posted February 9, 2013 Kasper like Vostok but at 50 tough to wear ,I do not even go there. To be honest 47mm tops and then if it over 16mm thick I stay away. Wish I could wear Rolex surprised you guys are not inclined to go that way. Yeah, it's a tough wear. That's why I put the 5 ring zulu strap on it, it kind of draws away from it's size on me. Link to comment Share on other sites More sharing options...
Mike on a bike Posted February 10, 2013 Report Share Posted February 10, 2013 kasper have a 48 x20 diver on Nato wears better but still a load and I am pushing 8in. I have the most beautiful Rolex-es but rarely wear due to size. Link to comment Share on other sites More sharing options...
sirdiesel Posted February 10, 2013 Report Share Posted February 10, 2013 Hey guys, I'm new here. i was wondering.. is there like a secret guide to sizes depending on your wrist size? i have very small wrists (i can circle with my fingers my wrists) i took a string wrapped around and i think im roughly a bit bigger than 6.5'' i was looking to buy a U-boat 50mm will i look rediculous in my work suit and that huge thing on my tiny wrist? or will it look like i have guts and outgoing? thanks! Link to comment Share on other sites More sharing options...
wiesn089 Posted February 10, 2013 Report Share Posted February 10, 2013 Here's a 42mm Speedy Pro and a 40mm Milsub on my 6.5 inch wrist. Sorry for the crappy Speedy pic. I don't wear watches larger than 42mm. Without bezel I stick to everything 40mm and under as they tend to wear considerably larger. I'm really looking forward to the new 40mm Ingenieur and would love to try on a 15202 or 15300 Royal Oak to see how they will fit on my pretty flat wrist. Here's a 37mm 6265 and a 37mm Seiko SARB033 for comparison. Link to comment Share on other sites More sharing options...
sgtguk Posted February 10, 2013 Report Share Posted February 10, 2013 Here's a 42mm Speedy Pro and a 40mm Milsub on my 6.5 inch wrist. Sorry for the crappy Speedy pic. I don't wear watches larger than 42mm. Without bezel I stick to everything 40mm and under as they tend to wear considerably larger. I'm really looking forward to the new 40mm Ingenieur and would love to try on a 15202 or 15300 Royal Oak to see how they will fit on my pretty flat wrist. I need that Speedy and the Milsub too looks great, care to share where you got it Link to comment Share on other sites More sharing options...
mjmj Posted February 10, 2013 Report Share Posted February 10, 2013 6.75 inch wrist Link to comment Share on other sites More sharing options...
wiesn089 Posted February 10, 2013 Report Share Posted February 10, 2013 Thanks! It's a MBW 5513 case with CGs shaped by Highoey and modified by JMB with fixed Springbars. Both did an outstanding job, it really looks very, very accurate and even has correct MOD engravings on the caseback. Partswise it has a serviced slow-beat ETA 2846 ticking inside, gen modified Omega Seamaster 300 hands relumed to match the lume color of the Ingod Milsub dial. Gen crown, tube and crystal are also installed as is a bleached CWP 60 minute insert with Yuki pearl. The strap is a Phoenix watch strap, the original supplier for the British MOD in admiralty grey. This build was meant to be a test run for a super franken 5513 milsub. I wanted to see how much I'd really enjoy it before spending more. I love it and currently I'm gathering parts for a Cal. 1520 powered franken with gen dial etc. Until then this one's getting A LOT of wrist time! 1 Link to comment Share on other sites More sharing options...
sgtguk Posted February 10, 2013 Report Share Posted February 10, 2013 Thanks! It's a MBW 5513 case with CGs shaped by Highoey and modified by JMB with fixed Springbars. Both did an outstanding job, it really looks very, very accurate and even has correct MOD engravings on the caseback. Partswise it has a serviced slow-beat ETA 2846 ticking inside, gen modified Omega Seamaster 300 hands relumed to match the lume color of the Ingod Milsub dial. Gen crown, tube and crystal are also installed as is a bleached CWP 60 minute insert with Yuki pearl. The strap is a Phoenix watch strap, the original supplier for the British MOD in admiralty grey. This build was meant to be a test run for a super franken 5513 milsub. I wanted to see how much I'd really enjoy it before spending more. I love it and currently I'm gathering parts for a Cal. 1520 powered franken with gen dial etc. Until then this one's getting A LOT of wrist time! Knew there was something about those hands, when you want to sell it to a good home pm me please got a nice velvet cushion waiting for her ! Thanks for sharing the build too Link to comment Share on other sites More sharing options...
spmi777 Posted February 23, 2013 Report Share Posted February 23, 2013 I just got a couple of new watches today and have some pics for the SWC thread My 6 and 3/8 inch {162mm} wrist IWC 3717.04 Pilot Chronograph with SS bracelet. Got it from Rochest 42mm Diameter 14mm Thick 21mm wide bracelet at the lugs Very nice AR coating and decent lume. All markers straight and aligned perfectly!!ImageUploadedByTapatalk1348957510.698926.jpgImageUploadedByTapatalk1348957542.048264.jpg Omega Seamaster Planet Ocean Newest v5 got it from forum member 42mm Diameter 14mm Thickness 20mm wide bracelet at lugs Bezel and markers align perfectly!ImageUploadedByTapatalk1348957558.016594.jpgImageUploadedByTapatalk1348957574.164509.jpg Very nice lume too!ImageUploadedByTapatalk1348957590.419011.jpg is the PO reps or gen ? Link to comment Share on other sites More sharing options...
kasper618 Posted February 24, 2013 Report Share Posted February 24, 2013 (edited) I'll add a few more shots, PAM396 47mm 6" wrist, on a good day... Edited February 24, 2013 by kasper618 Link to comment Share on other sites More sharing options...
Cromag Posted March 11, 2014 Author Report Share Posted March 11, 2014 Just giving this thread a love bump. Post WRIST SHOTS of your watches if you have a skinny wrist that is 6.5" or less. Make the pics useful by showing more of your arm to help others determine if they want to give that model a try. Also include your wrist size that day in addition to the model and diameter. IWC 3777 43mm on 6.375" wrist PS try to host your photos where they won't get removed down the road. Link to comment Share on other sites More sharing options...
droptopman Posted March 12, 2014 Report Share Posted March 12, 2014 My wrist might be skinny but the rest of me aren`t 16369_191583695145_3266360_n.jpg Thought we were showing watches not guns. Same here small wrists but lift weights....I will post some pics when I get home, in Palm Springs on vacation playing golf Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
ceejay Posted March 12, 2014 Report Share Posted March 12, 2014 As some would say "bigger needn't be better" 1920's J W Benson, London in 9 carat gold on a 6 3/8" wrist. 31mm. Elegant is the word Link to comment Share on other sites More sharing options...
simstre Posted March 19, 2014 Report Share Posted March 19, 2014 Another 6" wrist here! Rolex ceramic sub 40mm Link to comment Share on other sites More sharing options...
asciwhite Posted March 19, 2014 Report Share Posted March 19, 2014 ---------------------------- Context brother, context Just to illustrate a point. Thought we were showing watches not guns. Same here small wrists but lift weights....I will post some pics when I get home, in Palm Springs on vacation playing golf Sent from my iPhone using Tapatalk 1 Link to comment Share on other sites More sharing options...
thewatchmanpr Posted March 19, 2014 Report Share Posted March 19, 2014 you mean. club hairy wrists Enviado desde mi LG-E977 mediante Tapatalk Link to comment Share on other sites More sharing options...
Cromag Posted August 25, 2014 Author Report Share Posted August 25, 2014 I just got this PAM 380 Radiomir Black Seal today! The PAM380 is the thinner model Radiomir, like the 183, but with painted dial instead of sandwich dial. This 380 has a 45mm case diameter (52mm with wire lugs) and I measured 13.5mm thin which is very thin for this size watch. Here are a few pics on my 164mm - 6.375" wrist. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now