Rolexman Posted January 14, 2013 Author Report Share Posted January 14, 2013 "But if you say well, even serviced these movt. aren't worth it, then I will wait for a V3 or perhaps even a V4. It is not about the looks of the movt." Service is usually the first step but the major problem with all A-clones is no parts. V3/V4 etc may never come or not be much of an improvement. " I just want to fit gen hands and gen DW on a somewhat reliable movt." Genuine hands... Eta 2824/36/2892 etc hand sizes are 150/90/24 (some models show .25 or .26 ss hand size). Rlx 1530/70 etc 130/80/20 Rlx 3000/3035/3135 etc 140/95/22 You can probably mount 3000 series rlx hands on an Eta movement by broaching the hand holes depending on how thick the material is in the hour/min hands. Rlx 1530 series hands may be too small/thin to broach to Eta sizes. High quality tudor spec hands made for Eta movements are what nearly everyone uses. If you want 'solid gold' rlx hands, remember that rlx used plated hands for many years....and gold hands are very fragile. Date wheel overlays are an option or you could use a genuine rlx 3135 dw for an overlay on an Eta 2836/46 etc...providing you have enough room between the dw and dial. Genuine Eta movements will usually be more reliable than A-clones. I would say 'always' but some may differ. ...in my experience it has always been always. Thanks, But I do believe that the Y3135 can take a lot off genuine parts. But that's purely an assumption off course. And otherwise movements with no spare parts will become spare parts, so in the long run it will not be a problem Also based on you measurements I'm sure the A3135 will take genuine hands if I compare the dimensions. The Y3135 will not fit a genuine second hand from what I have read in 10:10 watchmaker's review. But as the date wheel on the A3135 is slightly larger than on the Y3135 I doubt that the A3135 can fit a gen date wheel. Link to comment Share on other sites More sharing options...
chefcook Posted January 14, 2013 Report Share Posted January 14, 2013 Thanks for the great post! I am a little disappointed by the reversing wheels. From my own experience with the V1 those will come apart and then that's it with automatic winding. The reversing wheels hold 6 or 8 small jewels each to mimic the function of the genuine part and once those fall around inside the watch they'll get stuck and probably cause additional damage. As long as there is no way to replace the reversing wheels with either genuine or aftermarket wheels like those of the Y3135 I'd say stay away from this movement. Link to comment Share on other sites More sharing options...
Rolexman Posted January 14, 2013 Author Report Share Posted January 14, 2013 Thanks for the great post! I am a little disappointed by the reversing wheels. From my own experience with the V1 those will come apart and then that's it with automatic winding. The reversing wheels hold 6 or 8 small jewels each to mimic the function of the genuine part and once those fall around inside the watch they'll get stuck and probably cause additional damage. As long as there is no way to replace the reversing wheels with either genuine or aftermarket wheels like those of the Y3135 I'd say stay away from this movement. Well that's the beauty of the one part reversing wheels of the A3135 as opposed to the (apparently crappy build) but gen like style of the Y3135: They won't fall apart By the way: I did not see the jewels you talk about in he review of 10:10. Link to comment Share on other sites More sharing options...
chefcook Posted January 14, 2013 Report Share Posted January 14, 2013 The jewels are not there in 10:10's review because the Y3135 uses a gen-like setup without them. The A3135 reversing wheels will fall apart. The are not one part but three plus a bunch of jewels. Red top plate, outer gear, inner gear with stem and the jewels inbetween. Not only is this design not true to the gen, it is at least as problematic as a second at six movement. None of the A3135 I held in my hands so far survived without problems with the reversing wheel and according to Puretime nothing was changed from V1 to V2 with those. I'd prefer the Y3135 over the A3135 any day. It might be of a lesser degree of quality but it does not have a flawed design and is serviceable to solve the quality issues. Link to comment Share on other sites More sharing options...
Rolexman Posted January 14, 2013 Author Report Share Posted January 14, 2013 The jewels are not there in 10:10's review because the Y3135 uses a gen-like setup without them. The A3135 reversing wheels will fall apart. The are not one part but three plus a bunch of jewels. Red top plate, outer gear, inner gear with stem and the jewels inbetween. Not only is this design not true to the gen, it is at least as problematic as a second at six movement. None of the A3135 I held in my hands so far survived without problems with the reversing wheel and according to Puretime nothing was changed from V1 to V2 with those. I'd prefer the Y3135 over the A3135 any day. It might be of a lesser degree of quality but it does not have a flawed design and is serviceable to solve the quality issues. Ah okay I see. Thanks for clearing that up. Link to comment Share on other sites More sharing options...
gmtlover Posted January 14, 2013 Report Share Posted January 14, 2013 So Y3135 wins the clone battle for now ;-) Link to comment Share on other sites More sharing options...
gmtlover Posted January 14, 2013 Report Share Posted January 14, 2013 (edited) Unfortunately not in stock at the moment. Wonder when that will happen. How can I contact Yuki? Cannot find his email on his site or here on rwg Edited January 14, 2013 by GMTlover Link to comment Share on other sites More sharing options...
Ray T Posted January 14, 2013 Report Share Posted January 14, 2013 excellent post, they sure are getting closer and closer to looking like a gen movement, i'm glad there are still plenty of tells though, because you don't want people to pass them off as gens. Link to comment Share on other sites More sharing options...
Ephry73 Posted January 14, 2013 Report Share Posted January 14, 2013 Still I long for a 15** clone movement Link to comment Share on other sites More sharing options...
watcher Posted January 14, 2013 Report Share Posted January 14, 2013 The yuki3135 took all my gen parts without issue which included date wheel, dial and all hands including second hand. Link to comment Share on other sites More sharing options...
gmtlover Posted January 14, 2013 Report Share Posted January 14, 2013 The yuki3135 took all my gen parts without issue which included date wheel, dial and all hands including second hand. That is great to hear! Now let's just hope the movt will be available soon! Link to comment Share on other sites More sharing options...
tanya Posted January 14, 2013 Report Share Posted January 14, 2013 This is awesome Looks like I can officially bury my Franken yachtie project lol Link to comment Share on other sites More sharing options...
van_damme1988 Posted January 14, 2013 Report Share Posted January 14, 2013 Another great review that deserves to be pinned. Thanks for taking time Link to comment Share on other sites More sharing options...
6now Posted January 15, 2013 Report Share Posted January 15, 2013 NIce, great review! Link to comment Share on other sites More sharing options...
watchguy51 Posted January 16, 2013 Report Share Posted January 16, 2013 Amazing post. Thanks a lot for this. Does the Y3135 have a freesprung balance / real balance screws? Link to comment Share on other sites More sharing options...
6now Posted January 16, 2013 Report Share Posted January 16, 2013 By the way, what's the weight of the A3135 v2? Anyone who knows how heavy/light it is compared to a Y3135? Link to comment Share on other sites More sharing options...
Rolexman Posted January 16, 2013 Author Report Share Posted January 16, 2013 Amazing post. Thanks a lot for this. Does the Y3135 have a freesprung balance / real balance screws? No on both accounts. The A3135 has microstella screws that are for show though. Link to comment Share on other sites More sharing options...
TheBattler Posted January 16, 2013 Report Share Posted January 16, 2013 Great review. Seems to me that Yuki's may have the upper hand design and QC wise, but isn't available apparently...? The SA3135 V2 is readily available in pertinent reps right now from Angus and seems to have decent parts support from him as well. Sent from my SAMSUNG-SGH-I717 using Tapatalk 2 Link to comment Share on other sites More sharing options...
dbane883 Posted January 16, 2013 Report Share Posted January 16, 2013 Great review. Seems to me that Yuki's may have the upper hand design and QC wise, but isn't available apparently...? The SA3135 V2 is readily available in pertinent reps right now from Angus and seems to have decent parts support from him as well. Yuki just got them back in stock yesterday. Bit of a price jump thanks to this tear down !! (J/K) $275 now. Link to comment Share on other sites More sharing options...
Rolexman Posted January 16, 2013 Author Report Share Posted January 16, 2013 Performance picture after break in of the movement added to my first post! The watch and movement is now for sale: http://www.rwgforum.net/topic/155150-famous-rolex-yachtmaster-ultimate-a3135-from-the-review/?p=1192192 Link to comment Share on other sites More sharing options...
GBOGH Posted January 16, 2013 Report Share Posted January 16, 2013 Very nice review. Thanks! Link to comment Share on other sites More sharing options...
dbane883 Posted January 17, 2013 Report Share Posted January 17, 2013 Performance picture after break in of the movement added to my first post! The watch and movement is now for sale: http://www.rwgforum.net/topic/155150-famous-rolex-yachtmaster-ultimate-a3135-from-the-review/?p=1192192 So I shouldn't feel so bad I bought the Sub C with this movement then? =). Link to comment Share on other sites More sharing options...
chiman12 Posted January 17, 2013 Report Share Posted January 17, 2013 Great review! I guess I'm keeping my Y3135 movements! Link to comment Share on other sites More sharing options...
krpster Posted January 17, 2013 Report Share Posted January 17, 2013 Hot damn Rolexman! That was great. Finally got time to sit down and read it properly. Very well done. Thanks for taking the time to do this and share it with us. Link to comment Share on other sites More sharing options...
gmtlover Posted January 18, 2013 Report Share Posted January 18, 2013 (edited) Watch-tool.de Don't know if they have them but you can try ;-) Edited January 18, 2013 by GMTlover Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now