Champagnesky Posted January 27, 2018 Report Share Posted January 27, 2018 I know tc uses a 2824 in his cases, at least in the ones I've seen. That is the same stem height as the 3135. However, he makes a movement ring to hold it and you can't use that on the 3135. I'm not sure if the 3135 will fit without a new ring being made. Just have to try it. If it has a 2824 in it, the stem height should be ok. By the way, the movement rings tc makes, are professionally made. Very niceGen cases with 3135 dont have movement rings right?Skickat från min iPhone med Tapatalk Link to comment Share on other sites More sharing options...
DVNE Posted January 28, 2018 Report Share Posted January 28, 2018 21 hours ago, Champagnesky said: Gen cases with 3135 dont have movement rings right? Skickat från min iPhone med Tapatalk Correct. The 3135 fits directly in a gen spec case Link to comment Share on other sites More sharing options...
Champagnesky Posted January 28, 2018 Report Share Posted January 28, 2018 1 hour ago, DVNE said: Correct. The 3135 fits directly in a gen spec case Is it the same with the cases that jf 3135 comes in? or is there a movement ring inside? Link to comment Share on other sites More sharing options...
Pombok Posted January 28, 2018 Report Share Posted January 28, 2018 There’s no movement ring in the JF’s with 3135.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
mlfloyd Posted January 4, 2019 Report Share Posted January 4, 2019 One rep dealer advertises an A3135 Mod movement in his Datejusts. Is it a Noob?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Ssouthall6 Posted January 4, 2019 Report Share Posted January 4, 2019 One rep dealer advertises an A3135 Mod movement in his Datejusts. Is it a Noob?Sent from my iPhone using TapatalkThey don't always list them correctly.If the dj is an ARF, even if it says sa3135 it's an sh3135.If it says noob a3135, it's an a2836-2 with a decorative plate.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
mlfloyd Posted January 4, 2019 Report Share Posted January 4, 2019 ARF. From what I read in this thread an SH3135 is a JF, right?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Ssouthall6 Posted January 4, 2019 Report Share Posted January 4, 2019 ARF. From what I read in this thread an SH3135 is a JF, right?Sent from my iPhone using TapatalkJF and ARF are two names for the same factory Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
mlfloyd Posted January 4, 2019 Report Share Posted January 4, 2019 Thanks. So it should be good for gen parts with the exception of the click spring, balance, and a few other parts.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
mlfloyd Posted March 8, 2019 Report Share Posted March 8, 2019 Hey guys! Thought I'd chime in since I'm Crown & Skull And you may know me from other forums. I just got clued into the JF vs. Yuki movement recently and I have a JF Yachtmaster incoming. So the story with me and Yuki is that I started buying his movements in bulk to preservice for forum members. Takes all the risk of them getting a bunk movement and I can ensure parts aren't broken and they're working properly. Recently he's asked me to be the main seller as he's not set up to service them ahead of time. So that's where I come in. As for this recently development.... it doesn't look good (for me). Until I get one in my hands I won't know for sure, but damn if they don't look identical. The biggest giveaway between the Noob SA and the Yuki was always the balance and winding bridge. The slot for the hacking mechanism is crooked in relation to the engraving vs. the Yuki and gen which is 90 degrees to the engraving. But even bigger tell is that the hairspring on the Noob SA is wound in the opposite direction! The Yuki and JF both have the hairspring terminal on the opposite side of the regulator vs. the Noob SA. I gotta say, if this is true it'll be a huge kick in the nuts as I was paying damn near that for a single movement BEFORE servicing Anyway - I'll post a full breakdown when I get my Yachtmaster unless one of you fellas beats me to it. Thanks.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now