Toadtorrent Posted November 13, 2008 Report Share Posted November 13, 2008 Great read!! Guys like Freddy are definitely pioneers in the mod-Arena!! Thanks for this post. Link to comment Share on other sites More sharing options...
bwhitesox Posted November 13, 2008 Report Share Posted November 13, 2008 I really enjoy reading Freddys posts...Gets me salivating every time. Link to comment Share on other sites More sharing options...
theblueprince Posted September 24, 2009 Report Share Posted September 24, 2009 Great post. As for the 316 Vs 904 steel, the 904 has more nickel in it which causes allergic reactions. The only upside to using it is that is is more corrosion resistant...but we're talking the absolute limits of destructive testing here to achieve such corrosion. You'd never get to the point in real life where 316 would be corroding and 904 would not. So it's a pretty pointless usage by Rolex imo, seeing that so many people cannot wear their watches/bracelets due to allergy to nickel. Link to comment Share on other sites More sharing options...
archibald Posted September 27, 2009 Report Share Posted September 27, 2009 Great thiking and a gret project, freddy. I've long wondered about the following: Is there any way to fit the good dial/movement combo into a gen case? I've assembled enough gen parts to build a daytona and it would be nice to put them to use w/ the rep sec @6 dial/hands and movement while I source an el primero and dial. Of course if the if the case needs to be modified, I wouldn't do it. My smith is capable of making a movement ring, though. Conversely, would a feet-amputated gen dial work in the project you did? Only the biggest daytona head in the world could tell that case from gen and only then by a minor difference in the bezel... Great work! Link to comment Share on other sites More sharing options...
ubiquitous Posted September 27, 2009 Report Share Posted September 27, 2009 Arch, Unfortunately, the 116520's 4130 has the same size pinions as the EP400; as such, fitting a gen 116520 dial on a 7750 based movement is a no-go since the 7750's pinions are significantly larger (i.e. the dial's opening is too small). Additionally, the gen case is far too slim to fit the modified 7750 for seconds at 6:00; the thin case rep is only doable since there's a large flange on the backside of the case to facilitate the extra height of the movement. Link to comment Share on other sites More sharing options...
freddy333 Posted September 27, 2009 Author Report Share Posted September 27, 2009 Is there any way to fit the good dial/movement combo into a gen case? As far as a drop-in swap goes, I agree with Ubi. No way. But my guess is that if you are willing to do some serious surgery on the case & can work out a scheme to align the stem, it could be done (considering some of the dremel gymnastics I have had to affect to assemble DWs, I have come to the conclusion that just about anything can be made to fit as long as the external dimensions of the case are larger than the outer confines of the movement). However, I am not sure I could justify that much work for such minor returns since the low profile case (if a proper bezel & caseback can be found/fitted) is nearly indistinguishable from the gen. I doubt I would be able to tell them apart. I have enough trouble now Conversely, would a feet-amputated gen dial work in the project you did? Only the biggest daytona head in the world could tell that case from gen and only then by a minor difference in the bezel... Great work! Thanks. I think it was last year that someone did just that. Trouble was that I could not be sure which was which - the gen dial or the rep? At least, not from an arm's length away. The dial I use is very well done, which makes it difficult to tell it apart from the gen in the low profile case even when viewed side-by-side (I think even By-Tor said as much in 1 of his Daytona reviews of a completely out-of-the-box 116520 rep). So I am not sure that hacking a gen dial would make alot of economic sense. Now, if you could resize a full set of gen Daytona hands to fit the 7750, that would make a slight but noticeable difference (my watch is fitted with gen subdial hands, but it is the 3 large hands that hold the power). Link to comment Share on other sites More sharing options...
kevin300z Posted November 12, 2009 Report Share Posted November 12, 2009 Great work thanks freddy. Link to comment Share on other sites More sharing options...
milsub5517 Posted March 26, 2011 Report Share Posted March 26, 2011 Guys, Time to update the guide? The interest in Daytonas is still here and I doubt that original parts mentioned here are available any longer.. Link to comment Share on other sites More sharing options...
freddy333 Posted March 26, 2011 Author Report Share Posted March 26, 2011 I am sure they are, but some of the web addresses may have changed (see the Note at the beginning of the thread). 1 Link to comment Share on other sites More sharing options...
archierocks Posted April 23, 2012 Report Share Posted April 23, 2012 i would be very interested in if this could still work does anyone know how any of the trusted dealers daytonas compare with the ones used as a base to build one Link to comment Share on other sites More sharing options...
ajs914 Posted April 23, 2012 Report Share Posted April 23, 2012 The seconds@9 16520 Daytona is still an option an the movement doesn't have reliability problems. Link to comment Share on other sites More sharing options...
sneed12 Posted April 23, 2012 Report Share Posted April 23, 2012 The seconds@9 16520 Daytona is still an option an the movement doesn't have reliability problems. Subdial spacing is totally wrong. Link to comment Share on other sites More sharing options...
rwgforumfan Posted April 23, 2012 Report Share Posted April 23, 2012 Is IdolReplicas a TD? Link to comment Share on other sites More sharing options...
Eiderdaus Posted May 5, 2012 Report Share Posted May 5, 2012 What do you guys think of this case as base http://www.1-pc8838.com/rlds10004-grey-dial-asia-7750-running-secs-2001-model-p-3629.html The bezel looks very flat. Link to comment Share on other sites More sharing options...
freddy333 Posted May 5, 2012 Author Report Share Posted May 5, 2012 Is IdolReplicas a TD? What is a 'TD'? What do you guys think of this case as base http://www.1-pc8838....del-p-3629.html The bezel looks very flat. This is the current/standard, wide-body modern Daytona (not the low-profile case indicated in my article). Refer to my pic of the CGs, which identifies the low-profile case (which also has a flatter bezel). Link to comment Share on other sites More sharing options...
mrandazzo Posted May 5, 2012 Report Share Posted May 5, 2012 I guess TD stands for Trusted Dealer Link to comment Share on other sites More sharing options...
graf-fiti Posted May 5, 2012 Report Share Posted May 5, 2012 great write up Link to comment Share on other sites More sharing options...
JEKS Posted May 6, 2012 Report Share Posted May 6, 2012 If anyone has the 'left' over, case, crown and movement from one of these builds, please shoot me your price. I am looking for donors for a project I'm undertaking and these are a 'close enough' option. thanks - J Link to comment Share on other sites More sharing options...
marcoxxx1984 Posted May 6, 2012 Report Share Posted May 6, 2012 I think that freddy is the only owner of that correct thin case! Link to comment Share on other sites More sharing options...
jmb Posted May 7, 2012 Report Share Posted May 7, 2012 I suppose idolreplicas would be a Trusted Dealer by association as it's another of Tony's (aka watcheden) sites... Link to comment Share on other sites More sharing options...
mrandazzo Posted May 14, 2012 Report Share Posted May 14, 2012 I was browsing on watcheden...maybe it worth to try...but I feel you won't received what pictured in the page. http://www.watcheden.net/rolex-daytona-automatic-with-black-dial-stick-marking-i-36917-p-1.html If anyone has experienced this please share! Link to comment Share on other sites More sharing options...
JEKS Posted May 15, 2012 Report Share Posted May 15, 2012 Again, if anyone wants to sell the leftovers from oned of these builds, please give me a shout. Thx - J Sent from my BB Link to comment Share on other sites More sharing options...
philbone Posted January 5, 2014 Report Share Posted January 5, 2014 Hi Freddy333, Can you please tell me how to remove the dial form these Asian 7750 movements ? I need to reset my keyless and cannot find any securing screws. Thank you Phil Link to comment Share on other sites More sharing options...
freddy333 Posted January 5, 2014 Author Report Share Posted January 5, 2014 The 7750 has 2 side-mounted clips (in the red circles) that pivot in/out to lock/unlock the dial feet in the pillar (main) plate. With a small pin, tweezer or flat blade, gently rotate the clip out away from the movement to free each of the feet & the dial will then come off (make sure you remove the hands 1st). Link to comment Share on other sites More sharing options...
philbone Posted January 6, 2014 Report Share Posted January 6, 2014 Thank you Freddy, There were also some "stickies" holding the dial to the top plate, but all went well. I rebuilt the keyless works to re-align the stem, but the problem is actually not that - the stem actually does not want to stay in the watch! It seems to function correctly during the assembly, but then it comes out with little force when trying to set the hour time. I have now rebuilt it 3 times making minor adjustments to the spring on the setting level jumber. It is barely holding on but once the crown is screwed down, and the hour time has been set it is not an immediate issue. If you have any ideas they would be most appreciated ;-) Thanks again, Phil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now