Omega Posted December 3, 2008 Report Share Posted December 3, 2008 Hi! After some casework, like shaping and drilling lugholes and printing a new flat-top/open6-9 datewheel I put the parts together on a jubi-bracelet with gen endlinks. Also I relumed the dial and vintagize the hands... But where I can get some correct minute and hour hands? Link to comment Share on other sites More sharing options...
lanikai Posted December 3, 2008 Report Share Posted December 3, 2008 Looks good ..!! the Omega .. hands from Ofrei.. TMG would know the part number as I got the number from Him.. they match very well with the genuine.. but need a bit of Modding to fit.. Live Strong and Wear it Well. Link to comment Share on other sites More sharing options...
Toadtorrent Posted December 3, 2008 Report Share Posted December 3, 2008 Here's the info from TMG: "The dial was aged and the 24 hour indices extended a little to the edge of the dial. A genuine T116 was installed (glued in place) as well as a set of vintage relumed NOS Omega hour & minute hands from Ofrei (stock# HAN-2752). The stock GMT and seconds hands were recycled and repainted in flat colors plus a vintage lume. The Omega hands are nearly spot on to the real deal Explorer II and really make the watch. The hands are never correct on any of the 1655 reps. To finish it off I have a gen 7836 folded bracelet fitted to it." More details can be found in this post HERE. You can also check for some comparison pics for reference in my 1655 thread linked in my signature. Nice looking piece BTW! Link to comment Share on other sites More sharing options...
Omega Posted December 3, 2008 Author Report Share Posted December 3, 2008 Thanks my friend! That's what i need... Here's the info from TMG: "The dial was aged and the 24 hour indices extended a little to the edge of the dial. A genuine T116 was installed (glued in place) as well as a set of vintage relumed NOS Omega hour & minute hands from Ofrei (stock# HAN-2752). The stock GMT and seconds hands were recycled and repainted in flat colors plus a vintage lume. The Omega hands are nearly spot on to the real deal Explorer II and really make the watch. The hands are never correct on any of the 1655 reps. To finish it off I have a gen 7836 folded bracelet fitted to it." More details can be found in this post HERE. You can also check for some comparison pics for reference in my 1655 thread linked in my signature. Nice looking piece BTW! Link to comment Share on other sites More sharing options...
docblackrock Posted December 3, 2008 Report Share Posted December 3, 2008 The Omega hands are from a Flightmaster. Always nice to see another of these beauties, but please get rid of that awful Jubilee. I'm not a fan of them generally but it looks especially wrong on a 1655. Link to comment Share on other sites More sharing options...
Omega Posted December 3, 2008 Author Report Share Posted December 3, 2008 ... I'm not a fan of them generally but it looks especially wrong on a 1655. On such old watches there are no rules - and that's what I like on vinatge... I have a very good Oyster band for this watch, but this Jubi-band - I love it! Link to comment Share on other sites More sharing options...
Omega Posted December 3, 2008 Author Report Share Posted December 3, 2008 Some better pics: Link to comment Share on other sites More sharing options...
tmg Posted December 3, 2008 Report Share Posted December 3, 2008 Wow, nice job Omega! Toad already answered the parts question and they do need some broaching to fit, but the Flight Master hands are dead on for the gen. I have to agree with DBR, an Oyster bracelet is in order . I'm not quite the purist like DBR though, the Jubilee seems at home on a 1675 IMO. Link to comment Share on other sites More sharing options...
Omega Posted December 3, 2008 Author Report Share Posted December 3, 2008 Wow, nice job Omega! Toad already answered the parts question and they do need some broaching to fit, but the Flight Master hands are dead on for the gen. I have to agree with DBR, an Oyster bracelet is in order . I'm not quite the purist like DBR though, the Jubilee seems at home on a 1675 IMO. Thanks TMG, the Oyster bracelet needs only a polishing of the link-sides and it is ready to be mounted. But IMO the Jubi is a nice addition to the lot of details on the dial. But I will mount it soon, promised... Link to comment Share on other sites More sharing options...
polexpete Posted December 4, 2008 Report Share Posted December 4, 2008 Hey Bobby nice job, is that an MBW base? Good work my friend... P. Link to comment Share on other sites More sharing options...
Omega Posted December 4, 2008 Author Report Share Posted December 4, 2008 Hey Bobby nice job, is that an MBW base? Good work my friend... P. Thanks! I don't really know what case it is, but the most importand for me is that the crystal is pressed and the watch is waterproof... Link to comment Share on other sites More sharing options...
dieselpower Posted December 4, 2008 Report Share Posted December 4, 2008 Great looking watch well done. You say you printed a new datewheel (flat top 3). Is this a wheel that sticks on over the existing wheel or a whole new replacement wheel in one piece? I ask because the stick on ones have a few glitches (in my experience) and if you were able to produce a one piece replacement wheel I think alot of members would be interested in buying some - if that were at all possible. Link to comment Share on other sites More sharing options...
Omega Posted December 4, 2008 Author Report Share Posted December 4, 2008 Great looking watch well done. You say you printed a new datewheel (flat top 3). Is this a wheel that sticks on over the existing wheel or a whole new replacement wheel in one piece? I ask because the stick on ones have a few glitches (in my experience) and if you were able to produce a one piece replacement wheel I think alot of members would be interested in buying some - if that were at all possible. Thanks! Of course it is not a complete datewheel, only a overlay. But I had never problems with them in past. You have only to center them correctly, thats all! And a few modifications on the space-ring between dial and movement...voila! Link to comment Share on other sites More sharing options...
dieselpower Posted December 4, 2008 Report Share Posted December 4, 2008 Aah... thanks for response. I just got a bit excited. Oh well, business as usual. Link to comment Share on other sites More sharing options...
Stephane Posted December 4, 2008 Report Share Posted December 4, 2008 It's allways a true pleasure to see a member building one of these. I love it B. as you know. Hopefully mine will be on the way in early 2009 Congrats for your datewheel by the way. Link to comment Share on other sites More sharing options...
Omega Posted December 4, 2008 Author Report Share Posted December 4, 2008 Thanks, Stephane. I wasn't a friend of these model before, but in real it looks really really almighty! Link to comment Share on other sites More sharing options...
Tribal Posted December 4, 2008 Report Share Posted December 4, 2008 Wow, my friend you amaze me every time again... Looks fantastic..... Link to comment Share on other sites More sharing options...
Toadtorrent Posted December 4, 2008 Report Share Posted December 4, 2008 Thanks, Stephane. I wasn't a friend of these model before, but in real it looks really really almighty! Is there any way you can share the file used to print the datewheel?? Link to comment Share on other sites More sharing options...
chris7777 Posted December 4, 2008 Report Share Posted December 4, 2008 thanks for the pictures! Incredible rep... Link to comment Share on other sites More sharing options...
Omega Posted December 4, 2008 Author Report Share Posted December 4, 2008 Is there any way you can share the file used to print the datewheel?? It was not the perfect base, the scan was from a boysize Rolex. I sourced a gen datewheel now and I will make a 1:1 print which will be available in January. I hope I can find the right material for the overlays, because to make ready-to-install ETA wheels is not possible because the wrong date position, as you know for sure... Link to comment Share on other sites More sharing options...
JoJo35 Posted December 4, 2008 Report Share Posted December 4, 2008 It was not the perfect base, the scan was from a boysize Rolex. I sourced a gen datewheel now and I will make a 1:1 print which will be available in January. I hope I can find the right material for the overlays, because to make ready-to-install ETA wheels is not possible because the wrong date position, as you know for sure... This sounds like challenging project for sure. I think there may be some old ubi datewheels still hanging around; I've still got one left in my box. Perhaps Ubi could help with some advice for the proper material for the overlays. Cheers, JJ Link to comment Share on other sites More sharing options...
stilty Posted December 4, 2008 Report Share Posted December 4, 2008 hey guys, I'm expecting some brass blanks tomorrow. Took a while to source them and they had to be custom made. I was sent a few samples in steel and they look good. It is a difficult medium to work with. It is very thin. But a lot more stiff than paper or vinyl. They will be pad printed, as gen. I'm also waiting for the machine shop to finish my jig to hold and support the blank for printing (expensive, yet necessary.) Also waiting for the cliche for the printer (another expensive part). I just hope with all this work and research, I get the results I'm looking for. Stay tuned. Link to comment Share on other sites More sharing options...
Toadtorrent Posted December 4, 2008 Report Share Posted December 4, 2008 It was not the perfect base, the scan was from a boysize Rolex. I sourced a gen datewheel now and I will make a 1:1 print which will be available in January. I hope I can find the right material for the overlays, because to make ready-to-install ETA wheels is not possible because the wrong date position, as you know for sure... Keep me posted...if they turn out, I would be interested in purchasing one!! Link to comment Share on other sites More sharing options...
lanikai Posted December 5, 2008 Report Share Posted December 5, 2008 Omega .. I would be interested in your project fo sure !! thank you Lani Link to comment Share on other sites More sharing options...
Toadtorrent Posted December 5, 2008 Report Share Posted December 5, 2008 Omega .. I would be interested in your project fo sure !! thank you Lani Hey R, What's the progress on yours? What case did you end up using? I tried Shoutboxing you at one point on this...but missed a reply if there was one. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now