FxrAndy

I would say that the stem locking screw has worked it's way loose should be a simple fix. Where are you in the world

now that will be nice J

I have a question about tablets I am looking for a cheep knock off tab that i can but in a waterproof bag and watch TV/youtube/films on in the hot tub speces required are decent loud speakers and wifi Oh and cheep Sorry for the thread hijack

Nail on the head from Rolexman i would say, it is easy to forget to engage the spring

I dont think it is that big to be honest looking at the movement and subdial spacing

Stunning bob just stunning

Glues that are isocyanate give off a gas that bonds to organic matter immediately so if you have a finger print on your dial then the gas will bond to that and make it permanent. It is used by law enforcement to get finger prints off material that would normally be difficult to take a print off. Even if your crystal was perfectly clean if the glue had not fully cured and you refitted it then the gas would not be able to escape and would then collect under the crystal and any other finger prints there maybe for it to bond to. So that is why super glue is bad for watches.

Thanks D

What was the dial origin tribal?

As I said I have seen 3 different sizes and they were all handwind st with display backs get the watch first and then measure it. You never know I may have the crystal you need in my spares as I always order the one I want one smaller and one larger

Congratulations

never gets worn though, just one of those builds you think you want but when it is done you dont, i think the almost total lack of lume from the tritium puts me off

sure as hell beats my sugestion!!!!!! i will remember that one!!

this is the closest i got using a noob case

That one cant be the one in my original post as that had a frozen subdial at 6, i went in the end for the low dome "HW" one other wise it looks too deep

Having the watch would help yes

So you see a big bear and go politly tell it to go away????

I think that was the final answer on my case yes, but i have done a couple more where the case size was different from mine

well if it was a gen with a chronometer movement then you should expect -4+6 secs/day, as it is proberbly a rep you are talking about then -20+20 secs/day would be what would be acceptable from the factory, but it is not unusual to get far better. Just bear in mind that it is a rep and not a swiss watch, taking your rolex back to the AD and saying that runs 5 seconds fast a day will not get you far

you can replace just the spring or the complete barrel, not a difficult job to do at all

hmm what can i do with these bad photo btw not bad printing

you should have to turn the small screw that is next to and just up from the stem no more than 1 1/2 turns and then you can remove the stem

You can make a 2846 hack as well So You Have the best of both worlds and convert it to GMT

it is possible though with just a clarks crystal, a gen tube and gaskets

Answer in your other thread, that is normal