cib0rgman

Which watch did you use to build this one? Thanks

you are correct it should come off easily keep trying

The seconds hand look off to me, see how it ends is straight, it should be a little wider where it touches the dot and then narrow towards the end. take a look at this 16610 unless the 14060 has different hands.

here is the one I have on my 1665 Franken supposedly to be Gen

Chiman, do you use a standard eta movement ring, I have a 1655 that came with an Asian movement and I bought a 2893 GMT movement. I think is possible to install that movement on the case an the hands will clear the dial, do you have any advice for me? Thanks

Love this one I will keep an eye on your sell. The Stainless Date-just with black dial is all Gen except the Movement (Swiss Bulova 11BLACD)

Probably stupid question, but are all of them Gens?

There are no good rep pens at all here. They just look like gens way overprice for what they offer very low quality stuff.

I do not where you source them but I have not been able to get one to finish my 1675, I ended up buying a 2893, I am not sure if this will work.

I Browsed cousins website with the info provided in this thread. was able to find all the parts needed for an ultimate franken including the rubber strap; for about 1K you can turn your upo 42 into a master franken this includes the watch considering the Gen cost 3k is a heck of deal. 1/3 of the price and and only the case is rep. I thinking is easier than ofrei website.

You can build your own using a vintage 1655 but it will a vintage there is one for sale here there is no good GMT2 rep right now

I personally think that any QC pictures should take as is, no guarantee; as far as they send a watch that looks just like the one on the picture you will not be able to tell the difference.

are you building GMT watch, which model

does anybody sells the SSD anymore?

+1 and there should not be a price difference at all

how much is this one and does it have the ETA Swiss, ETA clone, or Chinese movement? Thanks

the AD has the most authentic submariner

you can use josh's 1655 case but not a 1665. I am building one right now. I bought a 2893 movement waiting for the movement.

Is that the 2893 movement that I see there; if so are you going to exchange parts or the hands clear the dial as is? Thanks

Ubi, Does the date changing method can be apply to change the date on a 1570 and how this will affect the movement?

You can use dial dots to secure the dial

Ubi, Is good to see back here and posting your pictures as always I envy your findings. cheers

As the title says, does anybody know the part number for a 45mm PO from Ofrei and does the gen insert fits the rep bezel. Thanks

So which dealer has the best base watch to do a 5512 project, I have a 700 crown that needs to be installed somewhere. 5512 came with a 1030 movement?

A gen date-wheel will only fit a gen movement, the calendar well turns in the opposite direction,