llsteve80

I dont see anything wrong with it, you are a reputable member of the forum, and I trust that your opinions were unbiased. In fact, I see this as a great way to get honest information out about new arrivals faster. If we have to wait until someone pays for it, it might be somebody who does not really know what they are doing, or is uninformed about gen/rep comparison. If you or a few others were to receive it for free for the purposes of writing a review, I think that is ok. Perhaps as a group, we should vote on whose "sponsored" reviews count instead of if it is ok? Maybe there should be a select few who are approved to write up official reviews for the sake of the forum, members selected by the memebers. For my vote, I would say By-tor and you, pugwash. Add-on: few mins later Perhaps, to keep the checks and balances in place, an auction thread can be started for the watch, with the proceed going straight to RWG. That way everyone benifits, whether they read the review or not, and the reviewer cannot be accused of being biased.

Appraised at 6200! Pfft! I like the part where they say the pics were taken before the watch was taken to the jeweler, so now the bezel is turned back where it belongs. Item number: 190193126565

But, the 7750 has symmetrical pushers on the movement, but DW did squeeze it into a case with asymetrical pushers, so I suppose it is possible. I guess no matter what, its not 100% unless you go with all gen parts. DW and Phong (sp?) cases look the best, but I don't like the subdials with the numbers not touching the bevels like on the gen dials. They are always printed on the inside of the line. Pushers and subdials are what I look at for the 3 ft test myself.

I can't tell 100% from the pics, but are the pusher asymetrically placed?

I see most are rocking out today, but I have DJ edin d from chicago on today. Here he is at the local club: http://myspacetv.com/index.cfm?fuseaction=...ideoid=25564100

otto frei has them for like 15 bucks. search in chinese movements and pick up the dg2813. Its 18,600bph. Maybe if you search DG2813 it will take you right to it.

Cubic-works.... I've seen sharper fonts but this is pretty good. Very thin too. Another slow shipper though. IMO, datewheels are the hardest part, hardest to find, glue and line up so I'm happy this one turned out pretty painless.

I had some brass and steel ones for eta, but I cant find them..... Anyway, the watch is already 2 grams over gen weight which for SS is supposed to be 107 grams I guess, so thats good. I don't really like the plastic spacers, but oh well. They do trim down in 1/10th the time though. To get the dials on I use this glue that is somewhat like rubber cement, but when it's dry its almost as strong as super glue, but can be removed with a razor if you need to. It gets semi stick after about 2 minutes, then I am able to still move the dial around and get it perfect before it sets all the way. I put it on with a toothpick, I love the stuff, but it's messy so caution is key since I don't want any glue getting anywhere on the movement. It's called power poxy stix-on contact. Are you going to throw some teaser pics up here soon? Or just wait until you're finished? Thanks everyone for your comments, and a big thanks to everyone who helped me find parts and gave advice and help!

it's almost impossible to say without the pic. Eta can be gold or nickel. We need some pics. That looks like a run of the mill scam site, but at least you got a watch....but ouch 529 USD? Why dont you just upload the pics to photobucket or something? Anyway, I hope you paid CC so you can cancel payment.

Wow you're right MM, that is a great site. All I saw before was the article I pointed to. No rolex section, only super high end like Lange and JLC....wow.

Heres the link to the article, I found this pretty interesting: http://home.watchprosite.com/show-forumpos.../ti-403931/s-0/

Here's some pics. My buddy said forget the MOP for now until we can find a good one, and for a good price, so I put the one that came with the case on for now. The hands cleared the markers ( no bending...) and the datewheel lined up perfectly on the 1st try. Love when that happens. I have to trim the plastic spacer down a bit so that the case back sits flush, but other than that its ready to go. Just watching it to see that it's working correctly and that the dial isn't too tight against the movement so the date changes freely. Oh, and it changes at 12:00:01...good enough for me. As for the lug holes, I told him to explain that the band was replaced, thats all, but who will notice anyway? Rep owners and people who buy lots of used watches to sell or collect, thats it. The Zigmeister suggested, or mentioned that some have had success with silver solder in filling them in, but I'll try that on some junk cases I have. No MAPP gas on this baby! I tried for an hour to get the crown to screw down with the coronet straight up, but no luck. Once I build my nicotine levels back up, maybe I'll give it another shot. Oh, and BTW, 6MM crown right? Because I also have a 5.33 and I don't even know what those go on, mid-size and airkings maybe? I'm going to have to wear it for a few days to "test" it before I send it to him now

Right, I forgot about the extra 1, oops. I think it looks good right now, its almost done and ready to go on my pals writs. I said "Eta" and they looked at me like I should explain further or something. HA. Take your time. A and E serials you mean? I forgot what the serial is on this case, and I am also too lazy to take the band off. Well, I'll put some pics up very soon, just have to take them.

I used to get them at the one in franklin park and sometimes alsip. Don't know if anyones around there anymore selling though. Had to be 8 years ago last I went...

thank you! that was killing me!

this is seriously slowing down my speed reading

Maybe I should go meet him anyway and just smack the shi* out of him Thinking deviously, maybe I can go downtown and meet the guy and when I get the watch in hand call it out and threaten to call the cops and see if he just leaves without the watch. Then I get a free rep and nobody is going to get suckered into paying thousands for it. Ha!

I'm waiting for it to arrive in the mail, my best amigo lives in Nashville.

Hey, look for my thread on the DW newman that I bought. I got one for my friend too, but he doesn't like it so ill be putting it up for sale on here next week. The DW cases are the only ones with assymetrically placed pushers. They come in 2 versions, one with v72 and most accurate and the other with 7750 which has a little different subdial spacing. Just keep reading up on it before you make a decision

Nice and blunt, yet you have a point Thanks I do that anyway, if they say I cant peek inside I assume fake. Papers don't make me feel any better at all, I think that scammers will try to emphasize having papers to distract buyers from what could be obvious.

I'm looking at this watch for sale locally, if it looks ok to you guys I'll go check it out this weekend. http://chicago.craigslist.org/chc/jwl/550043947.html

No intro necessary: Ebay item # 120213255397

I have the correct end pieces already, I just have them aside. It is a 16234 case, I just didn't have it near me anymore when I was typing and I figured everyone would take the 16200 as 162xx. My mistake. what I don't get is the no-holes and the holes case have the same ref# ? Or am I missing something here? As for it screaming fake from 20 miles away, I'm not sure. Most people don't know that much anyway. Most of them automatically assume fake anyway when they see a rolex.

Dang, see I told my buddy to wait and maybe a no holes case would show up. He doesn't understand that taking your time is better. Hence the problems I've had. It's hard to find no holes cases on the bay. I didn't install the springbars for the pics, thats all. I just wanted to give an idea of what it's going to look like.

Here's some pics, sorry about the color being off, I haven't really had time to figure out my new camera. Sorry about the clutter too....shame on me, I just shoved everything out of the way