sander

Good luck mate! I received mine today see: http://www.rwgforum.com/topic/122132-modded-dsn-pam-25d/page__pid__880630#entry880630

You really should have the CP mod done. it's a huge difference! The strap is a tight fit but no problem. they do not move freely when you hold the case but you can move them with some light pressure.

I'm sorry but I'm not really a PAM guy. Who or what is TB? @ w0lf: Like always I removed the AR on a buffing machine. Quick and easy!

Finally after 17 day's I received my DSN 25D. I know we have some problems here with the post but 17 days seem way too long. Anyway it's here. Some other members already wrote some reviews about it so there is no need for me to write one. Although it's a great watch straight out of the box, I thought it needed some modding. (you know me ) The mods I did: Replaced the movement for a serviced one Installed a new cannon pinion (see here: http://www.rwgforum....-7750-movement/ ) Installed a Lello datewheel Installed a crystal from a pam 199 ultimate and removed the AR Installed a gen rubber strap Installed a gen deployment. Mods to do: Replacing crown for T48 (it's on the way) Replace the glossy paint on the bezel for matt paint Some extra finishing on the CG. Looks pretty good I must say. The date nice in the middle of the cyclops and the new pinion is really a great improvement. Sorry for the poor pics but with this shitty weather it's the best I can do.

it was send registered air post. I use this site to track: http://app3.hongkongpost.com/CGI/mt/enquiry.jsp Is there a better one?

Yes I did. unfortunately it only shows that it's sent on August 28th. So 16 days seems pretty long to me.

I'm not working on it right now. Busy with some other projects

correct it's dsn

Anybody from The Netherlands who received a watch from David lately? Mine is shipped on August 28th and still no sign of it. Should I be worried?

it's the size. 1.6mm

Sorry mate but you are very wrong. If the stem is not in the right place, there is no way to push the stem fully in and out and set the time. You actually might be able to wind it without a problem though

Are the hands free to pass each other?

Hello

I know there is black lume but I checked one a few weeks ago at my AD and there wasn't much lume on it. No glow at all, not even when I hold it under the light for more than 10 seconds. Also my gen navy dial does not have lume.

Great looking watch. I'm not sure about the strap though. I think I would prefer a black croc with white stitch. Don't go for lume for the hands. Just use black paint. Looks better and way easier to get

It sounds like your ratchet wheel is damaged and missing some teeth now. Because you will have metal filings in the movement, the only option is a complete overhaul and replacing the defective part. An asian ratchet wheel will be hard to find and a swiss won't fit. So it is not an easy problem.

Why would you go for a lume job? The gen doesn't have any.....

Here you go. I took the measurements of the APROO bracelet and the second pic is a side view of a conversion link so that you can measure that the hole of the bracelet is in the right spot. Better start measuring before you order. I know for sure that the gen wil not fit the ROO bracelet. Perhaps the reps are the same. I don't think so though.

No it will not fit and if it did I would stongly suggest not to put it on there. The Offshore is round and yours is flat. It will look strange!

Yep, the crown tube for the BP is a problem. I haven't seen a problem with the Top Gun though.

:good:

How could I have missed this one Absolutely one of the best!

It's good to wait! look at this beauty. really a noce one. Enjoy wearing it

No man, the crown for the 6497 can not be used for a 7750. It's totally different.

An A7750 stem will fit the swiss movement. or you can also order a 0.9mm swiss stem so I don't see the problem.