Francisco

I will upload pictures and info later.. Francisco

Watches I tried: Chopard Chrono limited 2007...the grey dial.. OK. HBB... OK Cost of the part... 6 pounds + tax+shipping. Manual winding improved a lot...so smoothly now... I checked the dimensions of the asian and swiss RWs...so similar. Francisco.

I have tried the ETA reversing wheel in two watches and works perfectly Francisco

I have just installed the ETA reversing wheel, without any mod..and works perfectly... I have to check it up... but at the moment works very well... Francisco.

It is a problem in the reversing wheel. Please, have a look to this tuto: http://www.rwg.cc/members/Repairing-manual...ind-t93138.html Francisco.

It is beginnig to be a very common problem. Yes, some times cleaning as my tuto shows does not work. Then you have to replace the reversing wheel. I have just bought the gen reversing wheel and I will try to find a solution to fit the gen RW without using a lathe...but probably I will fail.... Francisco.

I made a review and modding here: http://www.rwg.cc/members/Review-Modding-T...eur-t91339.html Francisco.

yes...

A member has sent to me his Porsche Flat 6 for modding the back. BTW, this watch is amazing, really beautiful. It is now one of my future watches. Here a picture of the gen: Follow the flaws of the movement: These flaws are very similar to the Hublot Bib Bang rep. Absence of regulator and incorrect bearing and bolt. You can have a look here about the mods employed for the HBB and that have been used for this Porsche rep: http://www.rwg.cc/members/Decals-Modding-Hublot-t87659.html Modding the bearing is quite more complicated than in the HBB. However, the final result is not bad

Ii would be not difficult to add a jewel to the seconds output. Francisco.

I did not check that, sorry.

Can you use my pictures to point the gear? Francisco.

Thanks to everybody for their comments... Francisco.

yes..some times you touch the plate after re-assembling, and the movement stops... just a litte pressure... mine is working again...however i was scared.... Francisco.

We are going to review the new Omega chrono movement. After removing the case back we check that an Asian 7750 has been employed for this modification. The first visible problem with this modification is that the chrono pushers are not placed in the correct position. Here the difference is shown: As previous picture shows, the pushers are one minute up and down in the rep. This happens because the movement that Omega employs is not based on the 7750, and the pushers are in a different place. Therefore, all Omega reps will have this flaw, all.

try more times..normaly it will finally work...

Look for Omegas... there are several models available qith A7751 Francisco

I am quite sure the movement is reliable... I will try to post soon the review... Francisco.

yes...please... with this picture the mod is really simple...

The review is coming.... Francisco.

It was sold.. I took the pictures before selling it... however.. i can mod another one if you want... Francisco.

i need a better picture. Otherwise it take hours and hours to merge both pictures... too difficult...

It is a specific problem of this modified 7750. Search for Chopards with this movement... Francisco.

Following The Zigmeister comments, you may have a look here: http://www.rwg.cc/members/Repairing-manual...ind-t93138.html Francisco.

Fido, I see now what you mean. I can try to merge both images... however....this is very time consuming... And the last picture you have posted is not a picture, it seems a drawing.... can anybody find a better picture? Francisco.