gplracer Posted November 13, 2009 Report Share Posted November 13, 2009 I would like to be able to remove hands from a dial and put them back on again. This would seem a reasonable start to doing things in this hobby. Where can I buy such tools and what tools would you suggest? Thanks! Any other basic tool suggestions are welcome as well. Link to comment Share on other sites More sharing options...
Brightight Posted November 13, 2009 Report Share Posted November 13, 2009 Absolute minimum you need a decent set of Jewellers Screwdrivers. It's not worth scrimping on these in my opinion, get the best you can afford. Hand remover and hand setting tool, definitely a pair of decent tweezers (practice with them, it's worth it) and a loupe or two. It's also worth getting some boxes to hold the parts you remove. And a movement holder is extremely useful. Some non powdered rubber gloves or finger cots to avoid marking anything, and some Rodico cleaning putty. Oh and you will need a rubber ball case back remover. Finally you may want to get a small bracelet pin remover though to be honest I've used mine twice in two years. Where to get them depends on where you are. Most are available from ebay, though I would buy the screwdrivers from a watch tools and parts supplier. Link to comment Share on other sites More sharing options...
ubiquitous Posted November 13, 2009 Report Share Posted November 13, 2009 What tools do you have already? If you are starting from scratch, I would say you'd need: -An assortment of jeweler's screwdrivers -#2 tweezers -Caseback tool/wrench -Bergeon #6 hand puller -Bergeon hand setting tool -Pithwood -Rodico -Dust blower -Finger cots -Dial protector -Movement pad Check out Watchbitz here on the forum (offshore). He'd be a good place to start for getting some good stuff... Link to comment Share on other sites More sharing options...
alligoat Posted November 13, 2009 Report Share Posted November 13, 2009 I just got a set of screwdrivers from Watchbitz- very nice blades and a very reasonable price. Definitely worth checking out. Link to comment Share on other sites More sharing options...
lanikai Posted November 13, 2009 Report Share Posted November 13, 2009 All you need is right here on the Forum here> Watch Bitz AC Lani Link to comment Share on other sites More sharing options...
KB Posted November 13, 2009 Report Share Posted November 13, 2009 +100 Watch Bitz Ken Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted November 13, 2009 Report Share Posted November 13, 2009 Just to do what you want the minimum: caseback opener 1.20mm screw driver hand remover improvise with pen hand press, plastic baggy dial protector and a mouse pad for uncasing and a sturdy hand. Recommended set of tools for a flawless job (with some experience): caseback opener case vise set of screwdrivers movement holder soft lint free work pad finger cots bergeon 6938 protector presto hand remover nylon tip hand press rodico or rub off spring bar remover blower bulb and a set of tweezers thats a pretty serious kit that can acomplish most common jobs Link to comment Share on other sites More sharing options...
gplracer Posted November 14, 2009 Author Report Share Posted November 14, 2009 Thanks guys! I only have a set of jewelers screw drivers and a case press. I have these from the old days when my parents had a jewelry store. Link to comment Share on other sites More sharing options...
Francisco Posted November 14, 2009 Report Share Posted November 14, 2009 do not forget dealextreme to find some tools: I made a small review here: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now