woody99 Posted February 20, 2010 Report Share Posted February 20, 2010 I was just wondering if there is any reason to get a gold plated ETA movement instead of the nickle plated one. Is one significanly better than the other? Any real cost differance? Thanks, Woody99 Link to comment Share on other sites More sharing options...
FxrAndy Posted February 20, 2010 Report Share Posted February 20, 2010 no cost Difference i have seen Link to comment Share on other sites More sharing options...
freddy333 Posted February 20, 2010 Report Share Posted February 20, 2010 The older ETAs tended to be nickel-plated (my circa 1987 DJ rep came powered by a (still running) nickel-plated ETA 2846). I tend to prefer the appearance of nickel over the current gold colored plating, but I do not know if either has anything over the other from a technical standpoint. Link to comment Share on other sites More sharing options...
amptor Posted February 20, 2010 Report Share Posted February 20, 2010 Some dealers charge more for the nickel, doesn't mean it is better. There have been people in the past who said that the nickel ones were gen new ETA and the gold ones typically are rebuilt. But who am I to say. I just find it interesting that one dealer would charge the same for nickel and gold once they can't source nickel any more and then another dealer comes up and says they have nickel and charges $40 on top of what it would cost for a regular gold movement, when this is a piece you rarely ever take a look at unless you have something like a clear caseback omega seamaster aquaterra of course. Link to comment Share on other sites More sharing options...
Tribal Posted February 20, 2010 Report Share Posted February 20, 2010 Gold plated Eta are assembled for the outside EU Market in Asia. Nickel plated Eta where assembled in the EU. That's it,there is no quality difference I think. You get gold plated ones factory new not refurbished or something like that. Link to comment Share on other sites More sharing options...
veja74 Posted February 20, 2010 Report Share Posted February 20, 2010 It is my understanding, and I don't remember where I read it, that the nickel plating is considered a water resistant movement. I think I might have seen that in one of my movement catalogs. As for the gold color, isn't that just brass as that is what these movements are made of? Link to comment Share on other sites More sharing options...
RWG Technical Posted February 20, 2010 Report Share Posted February 20, 2010 Gold plated Eta are assembled for the outside EU Market in Asia. Nickel plated Eta where assembled in the EU. That is correct, Gold = Hong Kong factory, Silver = Swiss Link to comment Share on other sites More sharing options...
RWG Technical Posted February 20, 2010 Report Share Posted February 20, 2010 It is my understanding, and I don't remember where I read it, that the nickel plating is considered a water resistant movement. I think I might have seen that in one of my movement catalogs. As for the gold color, isn't that just brass as that is what these movements are made of? Now that certainly is a slant I have never heard of before, movements aren't and can't be water resistant, the actual watch case is (or isn't) waterproof. All movements are stamped brass, the silver ones are Nickel plated, the gold ones, are Gold plated. If you find that in a catalogue, I would love to see it. Link to comment Share on other sites More sharing options...
nikki6 Posted February 20, 2010 Report Share Posted February 20, 2010 I don't know the difference, but I have beautiful nickle plated ETA in my Omega Aquatimer (the old school one that Pug is very fond of). Other than people who have seen it saying it looks stunning, I don't think it makes it any better?! Maybe it's a, red car is faster, kind of thing?!? Sixx Link to comment Share on other sites More sharing options...
FxrAndy Posted February 20, 2010 Report Share Posted February 20, 2010 Silver is available from boley gold is not right now, they are just colors that's all 2892 are available in both prices don't include tax or postage so don't think they are that cheep Link to comment Share on other sites More sharing options...
gillorin Posted February 20, 2010 Report Share Posted February 20, 2010 I believe that not only does it signify where the movement is marketed, but the gold movements are distributed as ebauches and then assembled at their destination, while the silver movements are whole. Link to comment Share on other sites More sharing options...
woody99 Posted February 21, 2010 Author Report Share Posted February 21, 2010 So would an ETA 2836-2 with gold be assembled in asia And hence less quality then a swiss assembled 2836-2 (nickle plated)? Link to comment Share on other sites More sharing options...
Jkay Posted February 21, 2010 Report Share Posted February 21, 2010 So would an ETA 2836-2 with gold be assembled in asia And hence less quality then a swiss assembled 2836-2 (nickle plated)? An ETA factory in Asia is still an ETA factory. They dont change their quality dependent on the Country in which they are located. Link to comment Share on other sites More sharing options...
plaifender Posted February 21, 2010 Report Share Posted February 21, 2010 An ETA factory in Asia is still an ETA factory. They dont change their quality dependent on the Country in which they are located. +1... it doesn't change the quality. A gold plated is still assembled by the eta factory, just in asia... nickel plated assembled in switzerland. quality control is the same for both.. exceptional! Link to comment Share on other sites More sharing options...
G.Curcio Posted February 21, 2010 Report Share Posted February 21, 2010 I luv this place, I always learn something new! Link to comment Share on other sites More sharing options...
FxrAndy Posted February 21, 2010 Report Share Posted February 21, 2010 Well if you look at my last post you will note that the gold on the 2892 is more expensive than the nickle, Personally i just think they are different colors. Link to comment Share on other sites More sharing options...
automatico Posted February 22, 2010 Report Share Posted February 22, 2010 I have a friend who has private label watches made and he can get eta 2824 movements either goldtone or silvertone from swatch/eta in lots of 500 and iirc, the goldtone was a few $$ more...all made and assembled in switzerland. He can not take delivery of bare movements but must have them shipped to a swiss assembly shop where he sends the rest of the parts...case, dial, hands, crystals etc and the shop assembles the watches. The shop delivers only the finished timehead, no bracelets or straps are installed to save $$. Last time I talked to him (about 6 months back), he said eta movements were getting too expensive and he was looking into alternatives. I read years back that goldtone eta quartz movements were swiss assembled and silvertone models were asian assembled using swiss parts but do not know if it holds true or not. Early omega movements were copper plated. All the omega freaks claimed they were rose gold! plated but they were just copper plated. http://members.iinet.net.au/~fotoplot/rgold/rgold.html Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now