Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

Two new babies at home... Daytona 6263, and 6239 !


Valty

Recommended Posts

Hello RWG :-)

This is the 2nd episode of my series, the first episode was here !

So... I have finally created my 6263 and my 6239, thanks to a great guy in France who accepted to works with my "reps" (thanks Xavier for all your help ;-))

I have made some "quick crappy photos" for sharing. Here they are ! :-)

---------------------------------------------

The specs are :

-- 6263 --

- Valjoux 726 movement, freshly serviced and adjusted

- Old school Vietnam case, high quality here

- Genuine pushers from service

- Genuine 703 crown, a little used but fine

- Probably rep tube, thanks to an "old" member here, who sold me this as gen :protest: . Need to be water-tested before thinking about changing it !

- Genuine new Tropic 21 from service - thanks for this same member who sold me a damaged / rep crystal as gen :bangin:

- DW white dial & hands - probably the best I've seen from DW, look at this coronet and "Daytona" printing !

- Replica 571 end pieces, my gen 571 are probably lost at Los Angeles postal sorting dept. :angry2:

- And most important, gen 6263 bezel (MKII or MKIII I think... not sure). No, it's not damaged... it's vintage :inverted: There is a lot of history on this bezel !

I probably need to "vintagize" a little the case of the watch !

-- 6239 --

- Valjoux 72 movement, freshly serviced and adjusted

- Phong old school case - very high quality

- Phong's pushers

- Gen 6mm crown and tube, I don't know the refs :g:

- Gen Tropic 21 in very good shape

- DW black dial & hands

- Gen 557 end pieces, because I've basically lost these gen 571 :cc_hang:

- Phong 6239 bezel

---------------------------------------------

Some bezel and hands adjustments are planned, the bezels are not perfectly centered, and 1 hand is "slipping" when the chrono resets.

It's not a big deal, a little of glue or some news hands are needed.

Did you know that the Valjoux 72 and 726 pinions are not exactly the same size ?

The 6263 hands were mounted on a v72, and needed some adjustments to fit the 726...

Well, I'm quite happy to see these two new babies here, even if I had a bad deal here, and a postal loss with gen 571 and a Phong caseset, only for this month :cc_hang:

First, movement pics... you can see a v72 at the right, and a v726 at the left :

DSC_1629.JPG

DSC_1632.JPG

DSC_1634.JPG

DSC_1635.JPG

DSC_1637.JPG

DSC_1640.JPG

Now... the case backs and side views...

DSC_1641.JPG

DSC_1643.JPG

DSC_1644.JPG

DSC_1645.JPG

DSC_1646.JPG

DSC_1647.JPG

And now, the faces.... :D

DSC_1654.JPG

DSC_1658.JPG

DSC_1661.JPG

DSC_1662.JPG

DSC_1663.JPG

DSC_1668.JPG

DSC_1672.JPG

DSC_1676.JPG

DSC_1679.JPG

DSC_1680.JPG

DSC_1681.JPG

DSC_1682.JPG

DSC_1683.JPG

DSC_1687.JPG

DSC_1688.JPG

Again, I'm sorry for the crappy quality, this is the best I can do without the sun ;-)

Misc. facts I've seen with my watchmaker :

- Gen pushers makes a lot of differences with DW pushers in terms of quality. My Phong screw-pushers lost-at-post-sorting was very fine too, surprisingly

- It's quite hard to find a DW dial with a fine coronet :(

- DW seconds chrono hand have a too small tube ! Lots of slipping if you don't glue it

- Rep dials have too small feet, a little of glue is needed to fix it properly

- Rep cases needs some working on the length of the pushers, even if it's Phong's case

- There is a world of differences between the two cases you see here, and the DW's case : the metal used is not the same, the "brushing" effect is not the same, and the DW engravings are very (very) poor

- Gen 571 end pieces are not fitting DW, Phong, or any other rep cases I have !

- Rep bezels are really thinner than gen ones

- The v726 is much more beautiful than the v72 :clap:

----------------------------------

Next step is to create a "Geneistein" 6265 with gen dial, hands, bezel, Phong's case & pushers, gen 702 crown, gen 7020 tube, probably rep 571, and another v726... :)

----------------------------------

I hope you enjoyed the photos, and have a nice day ! :-)

R.

Link to comment
Share on other sites

Beautiful pair :tu:

Fantastic, Valty! You're very lucky to have those two dials, as DW's last batch wasn't nearly as nice.

Thanks :-)

I agree on the fact that these 2 dials are really good !

The silver dial is 6 months old, and I received the black dial 1 month ago (instead of a silver one, but it was nice so I kept it :))

You can notice the coronet on the silver dial is much better anyways ;)

Link to comment
Share on other sites

WOW! Sexy pair. Very very nice. You may have to vintage up that 6263 a bit to go with that bezel. :)

I'm thinking about it, but I need to protect T21 and the gen pushers...

I currently don't really know how to make a good vintage happens :)

Probably putting scotch on crystal and pushers, and put the watch with my keys and my zippo in my pocket... What do you guys think about it ?

Link to comment
Share on other sites

Thanks guys for all the comments :)

Would a coronet of a gen DJ dial work on these. I'm sure there are a few unused and scratched dials around.

It will work, I'm sure to already have seen that here

But does it worth the mod ? I don't really know... :)

Link to comment
Share on other sites

  • 1 month later...

Valty, you have a great Rolex Cosmograph culture

Chapeau bas,

I think I have missed somthing about DW... depending of the hour, its not the same guy answering the questions, ist going from regular English to African blabla style, so WTF ?

Are we talking on the same frequency ?

Link to comment
Share on other sites

Valty, you have a great Rolex Cosmograph culture

Chapeau bas,

I think I have missed somthing about DW... depending of the hour, its not the same guy answering the questions, ist going from regular English to African blabla style, so WTF ?

Are we talking on the same frequency ?

Thank you JJ :)

About Steven - I had the contact with him after sending an e-mail on the DW website... He is always the same guy, but he do not answer so much

About DW himself, I don't really know, I had my first "contact" today :)

R.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up