omgiv Posted April 18, 2012 Report Share Posted April 18, 2012 What do you guys think of this case? It is a z serial but is not labeled 16610T. The engravings themselves look very sloppy to me. The bevels on the lugs also remind of my etaswiss case. The seller has over 600 feedbacks at 100%. What do the experts say? http://www.ebay.com/itm/330718576913#ht_7666wt_1026 Link to comment Share on other sites More sharing options...
duke1973 Posted April 18, 2012 Report Share Posted April 18, 2012 The insert is trash, the LEC on the crystal can be seen easily, and the bezel just looks wrong. The case engravings look stamped like gen, but also look sloppy like you said?? There are also no end link "rub" marks on the case engravings like most all rollies I've seen. It could be an NOS replacement case with aftermarket bezel, bezel insert, rep crystal?? Overall I'm confused? I know I wouldn't buy it because of the inconsistencies I mentioned but I also wouldn't say it's gen or rep because I can't tell? Link to comment Share on other sites More sharing options...
alligoat Posted April 18, 2012 Report Share Posted April 18, 2012 I wouldn't touch it- it doesn't past the smell test! Link to comment Share on other sites More sharing options...
fidhle007 Posted April 18, 2012 Report Share Posted April 18, 2012 Hmm, I think it's definitely a gen caseback but that crystal is not at all genuine. There's some ETASwiss stuff going on here I think... Link to comment Share on other sites More sharing options...
watcher Posted April 18, 2012 Report Share Posted April 18, 2012 I see nothing fake about this case to be honest. Insert has a flat 4 so is older than 2006 I would say. I have a gen insert that has a pearl that looks as rough as that too! Case is correct as is crystal, crystal retainer etc! You will also notice the slightly higher than centre crown tube position which is also correct and not seen on any rep case that I know of. Just my opinion of course! Link to comment Share on other sites More sharing options...
omgiv Posted April 18, 2012 Author Report Share Posted April 18, 2012 I don't doubt your opinion at all Watcher, but there are just some things that I can't wrap my head around. The watch looks like a mixed bag of parts to me. The font of the insert looks okay to me but the pearl looks like a WM pearl. It looks as if the insert is not seated into the bezel though in the side shot showing the tube. I also don't like that you can see the LEC in the picture without any magnification (as Duke said). The case back does look good except that it has 16610 engraved instead of 2160. I would expect a Z serial sub to have the newer style case back. I have seen the 16610 case back on older subs with lug holes. Which brings me to my next gripe. I would expect a Z serial sub to be engraved 16610T instead of 16610. Rolex changed that designation when they went from a lug hole case to no lug holes. I have an etaswiss case that has a high crown tube like a genuine case. Link to comment Share on other sites More sharing options...
fidhle007 Posted April 18, 2012 Report Share Posted April 18, 2012 The crown tube is only a problem on TW and Noob cases, the ETASwiss case is correct. The ETA Swiss case also has the incorrect 16610 engraving so I'm guessing that is what this is, with an older gen caseback. ETASwiss casebacks are notorious for incorrect engraving too though so perhaps the Z-serial had "16610" inside. That LEC looks just like my ETASwiss crystal too. As does the insert... Link to comment Share on other sites More sharing options...
w.genzo Posted April 18, 2012 Report Share Posted April 18, 2012 Everythings looks gen to me, even if mixed from different sources. Caseback sticker is definitely an old style one, as well as the insert. Etaswiss has longer lugs and If I remember right it's marked M, I doubt it was re-engraved but everything might be.. I agree that it should have the T but if they re-engraved it, why not adding a T? Link to comment Share on other sites More sharing options...
janeto72 Posted April 19, 2012 Report Share Posted April 19, 2012 the midcase is fake.period. Link to comment Share on other sites More sharing options...
6now Posted April 19, 2012 Report Share Posted April 19, 2012 Mid case is fake, caseback is gen, insert is gen. If one of us is buying it, let's help out. But if others on ebay want it, I wouldn't assist those trf boys. Link to comment Share on other sites More sharing options...
Justasgood Posted April 19, 2012 Report Share Posted April 19, 2012 I an L in stainless are cartoonish. Mid case is not gen. All else possible except crystal. IMHO Link to comment Share on other sites More sharing options...
irolexu Posted April 19, 2012 Report Share Posted April 19, 2012 rolex does not use that 5 found in the serial number....FAKE but an excellent case for a project though!!! DIBS! ill offer him 300 bucks Link to comment Share on other sites More sharing options...
Justasgood Posted April 19, 2012 Report Share Posted April 19, 2012 Artificial aging(scratches on the mid case) Link to comment Share on other sites More sharing options...
fidhle007 Posted April 19, 2012 Report Share Posted April 19, 2012 Any of you who think that insert looks gen must be freaking blind... I messaged the seller and got a short, snide remark back so I'm reporting it. Go ahead and do the same if you want, I'd hate to see someone lose there ass buying a fake case... Link to comment Share on other sites More sharing options...
Eiderdaus Posted April 19, 2012 Report Share Posted April 19, 2012 (edited) stay away from it for that money. The midcase is a rep, the xtal is suspicious and the insert who knows and who cares Edited April 19, 2012 by Eiderdaus Link to comment Share on other sites More sharing options...
irolexu Posted April 19, 2012 Report Share Posted April 19, 2012 guys guys he assured me that his CAMERA is distorting the details and that I should buy with confidence...here I was thinking this case was fake when his camera simply was just distorting those minor details!!! wheres the camera that does the opposite and make my watches look more gen like Link to comment Share on other sites More sharing options...
w.genzo Posted April 19, 2012 Report Share Posted April 19, 2012 Artificial aging(scratches on the mid case) Good point. I've never seen any used/vintage cases consumed like that Link to comment Share on other sites More sharing options...
janeto72 Posted April 19, 2012 Report Share Posted April 19, 2012 the midcase is a rep...the caseback is gen...the bezel insert is rep!!!STAY AWAY! Link to comment Share on other sites More sharing options...
6now Posted April 19, 2012 Report Share Posted April 19, 2012 Slice the price by half and i'll take it. Link to comment Share on other sites More sharing options...
fidhle007 Posted April 19, 2012 Report Share Posted April 19, 2012 Just got this from the seller: "16610T is a 40th anniversari submariner with green vezel the insert i had recheck and is ok the best test on an inset is the material that is made no insert replasement has an strong aluminum they bent easiky this one is hard and the font is ok too and dont worry any body that buy it has its time to check it and if something its wrong they can send it back i say no return but garanteed autentic - josecanaan" Link to comment Share on other sites More sharing options...
racer80 Posted April 20, 2012 Report Share Posted April 20, 2012 Over $1000 with three days left. I would just continue saving my money for a gen complete watch at that point. Unless someone gave me all the other parts to make it completely gen. Even then, I still don't think I could pull the trigger at that price. Link to comment Share on other sites More sharing options...
6now Posted April 20, 2012 Report Share Posted April 20, 2012 Just got this from the seller: "16610T is a 40th anniversari submariner with green vezel the insert i had recheck and is ok the best test on an inset is the material that is made no insert replasement has an strong aluminum they bent easiky this one is hard and the font is ok too and dont worry any body that buy it has its time to check it and if something its wrong they can send it back i say no return but garanteed autentic - josecanaan" Hahahah. I won't feel sorry for the buyer. Let the trf boys who look down on ALL of us rep enthusiasts help them. Link to comment Share on other sites More sharing options...
correctime Posted April 20, 2012 Report Share Posted April 20, 2012 Z series "would" be 16610 T....Rolex wouldn't forget to engrave that. To me the engraving looks like a skillful DIY job. The 8's don't look correct nor is the word "stainless".done the same size. With what people are capable of doing to aftermarket/sterile cases these day I wouldn't touch it. It doesn't look gen to me. Link to comment Share on other sites More sharing options...
w.genzo Posted April 20, 2012 Report Share Posted April 20, 2012 If I'm mistaking I apologize, but the seller nickname seems a weird coincidence to me.. http://www.rwg.cc/topic/144858-tc-submariner-16610-v-series/ http://www.rwg.cc/topic/145221-fs-sub-case-tc/ http://www.rwg.cc/topic/145320-fs-submariner-tc-v-series/ Link to comment Share on other sites More sharing options...
6now Posted April 20, 2012 Report Share Posted April 20, 2012 I know that name seems familiar not only here but in other forums too. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now