Big Dazza Posted March 13, 2014 Report Share Posted March 13, 2014 Hey guys. As some might know I've already started selling a lot of my collection to fund a nice gen. I'm getting attracted more and more to the 36mm Explorer 14270 and would be leaning towards the version with the Tritium dial. I prefer the 36mm version due to the dial configuration but the thing I hate is the non lug hole case and also its hard to find a local one in a complete set. Vintage 1016 Explorers are fantastic looking but unfortunately out of my price range. What do you guys think of the 14270 and do you think its a good or bad choice? Link to comment Share on other sites More sharing options...
Mike on a bike Posted March 13, 2014 Report Share Posted March 13, 2014 Love the watch Big D if you can wear something that petite. As to selling all and going Gen I was thinking that last week (even went to ADs to try on) but couldn't do it, I love watches plural I would really like a high end gen because I love watches to give up all or most to get one ,can't do it. Link to comment Share on other sites More sharing options...
Big Dazza Posted March 13, 2014 Author Report Share Posted March 13, 2014 Hmmm I'd probably end up keeping 2 low end cheap gens. After some quick searching there was an early version with lug holes! Only problem now is finding one with lug holes in a complete set with papers etc. This might be the winner if I find one at a reasonable price Link to comment Share on other sites More sharing options...
Cromag Posted March 13, 2014 Report Share Posted March 13, 2014 Go for it! You can always buy morgue cheap reps and you can always sell the gen. Link to comment Share on other sites More sharing options...
jpz5142 Posted March 13, 2014 Report Share Posted March 13, 2014 Well I'm unloading a few of my watches to fund my gen purchase, so I'd say there's nothing wrong with that. I also like the idea of multiple watches but I noticed that the more watches I have the more that I want..... I figure that I'll sell down to about three watches and then work up to get a nice dress watch. As far as the 14720 if you like it get it. However it seems like you have some reservations due to the lug holes. Spending that kind of money for something that your not in love with is silly in my mind. Thing with spending several thousand dollars is I expect perfection, heck I want perfection when I'm only spending a few hundred dollars. Maybe if one small thing bugs me I'd still go for it but if it's something bigger or more than one thing I'd say skip it. Get a rep and mod it to a fantasy of exactly what you want and save a bunch of cash. Could buy the 14720 and drill lug holes and be happy. But with a Rolex you have to wonder how much longer you can get parts to service it independently or send it to a RSC. And if you send it to a RSC with lug holes what are they going to do? Refuse to service it? Make you get a new mid case as part of the service? If lug holes are the deciding factor then I'd say skip it, you'd buy it and not be happy, there's no need to chase water down the drain.... Link to comment Share on other sites More sharing options...
Big Dazza Posted March 13, 2014 Author Report Share Posted March 13, 2014 Well apparently the early 14270's had a tritium dial and lug holes but they are pre 1994. Its gonna be hard finding a complete set in good condition with lugs holes The long search begins Link to comment Share on other sites More sharing options...
droptopman Posted March 13, 2014 Report Share Posted March 13, 2014 Big D, as hard as it is, try to be patient. Keep searching until you find exactly what you want. Any kind of compromise tends to lead to less satisfaction. Have more experience with the situation you are in with classic cars. Knew exactly what I wanted and was looking every day for that particular model. At times have had patience to wait it out for the "one" which lead to great enjoyment, other times compromised and bought something close--inevitably the one i really wanted shows up after buying something close and I am stuck trying to sell off the one that was close to get the one I really wanted. You know how that works take a loss trying to sell quick........Good luck on the hunt. Link to comment Share on other sites More sharing options...
jpz5142 Posted March 13, 2014 Report Share Posted March 13, 2014 The long search begins Isn't that alway the case with a "vintage" piece? We want it in decent condition so we have to search high and low... Have you considered using a broker to find it for you? They'd likely be able to scoop one out of thin air in the condition that you want. Link to comment Share on other sites More sharing options...
Big Dazza Posted March 13, 2014 Author Report Share Posted March 13, 2014 Hmmm broker eh? Never used one before. Who's out there that offers this kind of service? In the mood for a 14270 because of the heritage / cost ratio. For around £3000 the other options would be maybe a Tudor 7928. Only thing is there are so many franken 7928s out there that puts me off. Link to comment Share on other sites More sharing options...
freddy333 Posted March 13, 2014 Report Share Posted March 13, 2014 Love the watch Big D if you can wear something that petite. 36mm, for a Rolex, unless you're a trend-conscious fashionista (as opposed to a gentleman with classic style), is not petite. While I prefer more vintage models, there is nothing wrong with that Explorer. I say sate your desires. Link to comment Share on other sites More sharing options...
Big Dazza Posted March 13, 2014 Author Report Share Posted March 13, 2014 36mm, for a Rolex, unless you're a trend-conscious fashionista (as opposed to a gentleman with classic style), is not petite. While I prefer more vintage models, there is nothing wrong with that Explorer. I say sate your desires. Thanks Freddy, I think 36mm is ok, not too small for modern wrists and with a more straight forward design of the datejusts / explorers they wear quite well. I think the plain bezel and no date or cyclops of the explorer helps make it wear bigger. I actually have an old gen Seamaster 34mm and it wears just as big as a Datejust because of the dial size and the thin case profile. Link to comment Share on other sites More sharing options...
AKTime Posted March 13, 2014 Report Share Posted March 13, 2014 Hmmm broker eh? Never used one before. Who's out there that offers this kind of service? In the mood for a 14270 because of the heritage / cost ratio. For around £3000 the other options would be maybe a Tudor 7928. Only thing is there are so many franken 7928s out there that puts me off. The Tudor Black Bay is a fine Gen and it's in that price range as well if you are into that kind of thing. I love the 14270, I have the rep with no case holes and I wear it all the time. 36mm is a fine size for a watch and like you said, no-dates with smooth bezels seem to wear larger. Link to comment Share on other sites More sharing options...
Mike on a bike Posted March 13, 2014 Report Share Posted March 13, 2014 Mike on a bike, on 13 Mar 2014 - 07:40 AM, said: Love the watch Big D if you can wear something that petite. "36mm, for a Rolex, unless you're a trend-conscious fashionista (as opposed to a gentleman with classic style), is not petite. While I prefer more vintage models, there is nothing wrong with that Explorer. I say sate your desires." I would love to wear that one prefer vintage Rolex also but even the 40mm get swallowed up by my 8.5in wrist, now a 36 is just a joke on me ( I own a collection of 36mm 1950-70 manual winds wish they wore well on me). As far as being a "gentlemen with classic style", a gentlemen would not infer that I am not, but a pompous person might. Link to comment Share on other sites More sharing options...
panerai153 Posted March 13, 2014 Report Share Posted March 13, 2014 Big D, I would keep looking. One that you want will come your way sooner or later. I'm a firm believer in that if you don't like something when it's brand new to you and the "honeymoon" is in full bloom, it's not going to get any better. I just don't believe that watches will "grow on you" maybe they do for some folks but not for me. It's just like clothes, shoes, and just about everything else, if you don't really like it in the store when you try it on, it will definitely be a closet queen until you give it away, sell it or toss it in the Goodwill bin. If you don't like non lughole Explorers, I would definitely wait for one that fits what you want. Link to comment Share on other sites More sharing options...
Big Dazza Posted March 13, 2014 Author Report Share Posted March 13, 2014 Yea i know what you mean, I'll have to keep a look out, hard not being a patient man. Going to try find a decent Tudor 7928 if possible so which ever comes up first I'll probably pull the trigger Link to comment Share on other sites More sharing options...
alterego Posted March 13, 2014 Report Share Posted March 13, 2014 As atated bellow, sometimes one would sell the gen to buy another gen. Although I never thought of it until I did this six weeks ago. I sold my gen 1016 so as to buy myself a MINI Cooper. I'm totally happy with my decision, even knowing that I may never have such a classic on my wrist again. Link to comment Share on other sites More sharing options...
jpz5142 Posted March 13, 2014 Report Share Posted March 13, 2014 As atated bellow, sometimes one would sell the gen to buy another gen. Although I never thought of it until I did this six weeks ago. I sold my gen 1016 so as to buy myself a MINI Cooper. I'm totally happy with my decision, even knowing that I may never have such a classic on my wrist again. But was it a gen Mini Cooper? Link to comment Share on other sites More sharing options...
alterego Posted March 14, 2014 Report Share Posted March 14, 2014 But was it a gen Mini Cooper? But was it a gen Mini Cooper? Well, not really. It was made in Germany by BMW Link to comment Share on other sites More sharing options...
jpz5142 Posted March 14, 2014 Report Share Posted March 14, 2014 Ha, sold a gen to get a homage! Link to comment Share on other sites More sharing options...
wanlo Posted March 14, 2014 Report Share Posted March 14, 2014 the explorer I is always a classic. Link to comment Share on other sites More sharing options...
elconquistador Posted March 14, 2014 Report Share Posted March 14, 2014 You can get a nice explorer II gen for around $4k which I think is more versatile. Link to comment Share on other sites More sharing options...
Big Dazza Posted March 15, 2014 Author Report Share Posted March 15, 2014 Hmm I quite like the explorer 2 16570 white dial with cream tritium lume. Hard to judge though I haven't seen one in the flesh Link to comment Share on other sites More sharing options...
Nightwatch Posted March 15, 2014 Report Share Posted March 15, 2014 Price- and functionwise the white 16570 Expl II would be my choice. Did You take a look at the Tudor Prince SS Oysterdate Ranger I, goes from around 2200 to 3300 USD (and more) Link to comment Share on other sites More sharing options...
Nightwatch Posted March 15, 2014 Report Share Posted March 15, 2014 And as I was just taking a look at Steinharts once again as those are well built watches thought I might as well suggest these vintage looks at a reasonable price: http://www.steinhartwatches.de/en/OCEAN-One-Vintage,817.html (available April onwards) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now