Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

First attempt at restitching a strap - Black Bay Leather (pic heavy)


foxindebox

Recommended Posts

Hi Everyone,

I've just finished my latest project, which was to learn how to restitch a leather strap (i.e. change the thread colour).

I have a Brown Bomber strap from "Strapped for time" fitted to my Black Bay, but just couldn't get past the white stitching (here is a picture from their site)

50a07de481bd086efbb53a2f6208da14_zpse9bd

As we all probably know, this is one of the best options for a strap that is close to Gen. Unfortunately the white thread is not.... So it had to go!

So first I did my reading online and found out how to saddle stitch with two needles. Then I gathered my stuff (needles, thread, pliers, wax and my mate Stanley.....)

DA691224-A11D-4240-BBCB-44AC2259ECD8_zps

Note that I have already unpicked the original stitching and removed the hardware from my strap.

Then, I set up my table vice to hold the strap whilst I merrily stitched away :)

7E2179A2-DE72-4CED-AF7D-408DA7E4DB20_zps

So, I cut a suitable length of thread and threaded a needle on either end (I had already applied some wax to the thread beforehand).

F6655248-CCDB-46B0-8E42-606CED82479F_zps

241D9599-3209-41BD-BA05-BF3FC38A592B_zps

So off I went, starting with the end loops or whatever they are correctly called (I'm sure one of the real strap makers here can enlighten me!), and stitched using the existing holes, one needle in one way and then the other from the other side.

91DF5279-FCB7-46FD-9940-E16408496A45_zps

740246EA-E1E2-4399-A1A8-C069E251BBB6_zps

96867591-A07D-47C3-8DFD-3154FCA0945C_zps

Until finally.......

9C2043F0-2535-4370-83AD-2D29272777DB_zps

C1E194E6-4D38-4EFD-964B-3E69A27EEA6F_zps

ADC8012F-AC20-4121-8375-97D1FB8CA3A6_zps

And a last picture on the watch itself

C0D56CFB-6B36-4E0E-A27C-8F87AA9796E1_zps

I'm really pleased with the outcome and happy to have learned a new skill. Next step is to learn how to make the whole strap myself ;)

Hope you like it!

  • Like 1
Link to comment
Share on other sites

One question from me: is it cotton or nylon or... ?

Thanks ;-)

Just plain old cotton thread, with a little wax rubbed in by myself :)

Very nice, looks damn near perfect. Now you just need the clasp. Hopefully that will be coming soon from what I have seen. Already available non branded on the Parnis homages.

I know.... I Will be grabbing it a soon as I see one. I almost considered buying the Parnis, but that's an expensive clasp :D

Thanks again everyone

Link to comment
Share on other sites

Definitely mate. It's really easy, just needs patience and a few cups of tea to steady the nerves before ripping out the old thread (or any other nerve-steadying beverage of your choice ;) )

If I didn't throw everything at the nearest wall the 5th time the click spring of a 2836 flew away... I think I may be able to get calm enough
Link to comment
Share on other sites

Thanks once again to all of you for all of your kind comments. I have a black version of the same strap due to arrive soon and I'm going to try the same thing again to see if that looks even closer to the Gen strap. I'll put up some comparison pictures when it's done. :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up