guanaco Posted September 13, 2007 Report Share Posted September 13, 2007 Just read on a website that you need to charge it for 30min to get a full charge, can someone please explain this to me? I really don't know how much time to charge it, how much it will last, etc. I searched to no avail, if anyone could chip in I would appreciate it! *BTW the only rep I have is the UPO 'Lite' if that's of any help. The lume is kinda weak when left by itself, but when 'charged' directly next to a light source for 1 minute it becomes very bright! Then it slowly fades until it goes normal in 3-5 minutes. Link to comment Share on other sites More sharing options...
Victoria Posted September 13, 2007 Report Share Posted September 13, 2007 Just read on a website that you need to charge it for 30min to get a full charge, can someone please explain this to me? I really don't know how much time to charge it, how much it will last, etc. I searched to no avail, if anyone could chip in I would appreciate it! Yeah! Good question, Guanaco. I've been meaning to ask this but was newbie-shy. P.S.: Please let the answer not be Russian Father Bombs. Please let the answer not be Russian Father Bombs. Link to comment Share on other sites More sharing options...
Croolis Posted September 13, 2007 Report Share Posted September 13, 2007 RFB's are the answer. Yeah! Good question, Guanaco. I've been meaning to ask this but was newbie-shy. P.S.: Please let the answer not be Russian Father Bombs. Please let the answer not be Russian Father Bombs. Link to comment Share on other sites More sharing options...
plaifender Posted September 13, 2007 Report Share Posted September 13, 2007 sorry to say guys.. the rfb's would completely melt away the lume on any conventional watch.. i use the weaker U.S.mother bombs to get just the right amount of lume.. it glows for days... to answer you question seriously though... lume on reps is historically shitty. charge for as long as you like.. it will still stop glowing after 10 minutes.. get it relumed and enjoy Link to comment Share on other sites More sharing options...
NAVIGATER Posted September 13, 2007 Report Share Posted September 13, 2007 Just read yourself trough this PDFs and you will know it http://navigater.na.funpic.de/PDF/ Greetings Navi Link to comment Share on other sites More sharing options...
Victoria Posted September 13, 2007 Report Share Posted September 13, 2007 Just read yourself trough this PDFs and you will know it http://navigater.na.funpic.de/PDF/ You're the most helpful guy on this board. I love you, Navigater! *reads* EDIT: Maybe my eyes are tired, but I didn't understand a thing. All I got was that I had to excite my watch for it to lume brightly. Well, heck, that sounds like my boyfriend. Can't I just wear Victoria's Secret undies instead? @Raymond: I got it. Hmm, check your .pdf settings? Link to comment Share on other sites More sharing options...
rckh Posted September 13, 2007 Report Share Posted September 13, 2007 Link Error!!! Can't get the file.... Best regards, Raymond Link to comment Share on other sites More sharing options...
NAVIGATER Posted September 13, 2007 Report Share Posted September 13, 2007 For me it also works from the differnet PC and alsi via my VPN connetion to work it works without a problem Greetings Navi Link to comment Share on other sites More sharing options...
bbell6 Posted September 13, 2007 Report Share Posted September 13, 2007 I've read the 30 minute thing before. However, as previously stated, reps don't hold the lume long (5 or 10 minutes). I've got two of the Ken's Trading Company watches (RXWs - dial similar to a PAM). I can charge them for 5 or 10 minutes and they shine like flashlights at first. One of them dims relatively quickly but is still somewhat visible all night (it also has H3 tubes though). The other one dims much slower and still has good lume the following morning. In fact, it is brighter in the morning than my PAM rep right after a charge. Link to comment Share on other sites More sharing options...
guanaco Posted September 14, 2007 Author Report Share Posted September 14, 2007 Cool, thanks everyone! Now... I need one of those Father Bombs to make it shine like a torch! I think someone here did re-lume jobs on reps, can anyone please point me out who he is, and if you can, how much he charges? Link to comment Share on other sites More sharing options...
lanikai Posted September 14, 2007 Report Share Posted September 14, 2007 surprise (happily) how good the lumes are on the Omega.. PO's ... I charge it .. I sleep with my watches on for the simple reason that i wake up at 12 am (-5 GMT).. and tend to "rest' my eyes to long sometimes and need to have the time on my wrist all the time... omega PO's hold their lume for a good 4 to 5 hours.. no [censored]..and i just charge it for 30 seconds or so before i hit the lights. SOSF is great also.. along with the IWC cousteau diver .. and of course Ziggy's Link to comment Share on other sites More sharing options...
TWP Posted September 14, 2007 Report Share Posted September 14, 2007 A good relume done by the respected modders on these boards should not take that long to charge. For instance this picture was taking after dial charged under 60 watt bulb for 60 seconds. On a modded watch if you wear it all day in well luminated area you will find that the dial should have sufficient lume to make it throught the night. Link to comment Share on other sites More sharing options...
guanaco Posted September 14, 2007 Author Report Share Posted September 14, 2007 A good relume done by the respected modders on these boards should not take that long to charge. For instance this picture was taking after dial charged under 60 watt bulb for 60 seconds. On a modded watch if you wear it all day in well luminated area you will find that the dial should have sufficient lume to make it throught the night. Holy Crap! Looks great! Who did it and how much id it cost? Link to comment Share on other sites More sharing options...
TWP Posted September 14, 2007 Report Share Posted September 14, 2007 Holy Crap! Looks great! Who did it and how much id it cost? I did Please look in my collector section for prices for mods. Yes that is one intense lume shot my friend TWP Link to comment Share on other sites More sharing options...
Cosmo Posted September 14, 2007 Report Share Posted September 14, 2007 (edited) The radiation flux from the light source is partly absorbed by electrons in the glowing matter. The wavelengths absorbed are characteristic for the pigment, the matrix and luminous center. The delayed light (luminescence) is caused by the defects in lattice which traps electrons. When the electron is released from the trap, it retains radiating a photon that can be green or blue etc. The trapping is not very efficient. The long exposure under the light is thus needed. The more electrons are trapped the more intensive the glow will be. The trapping time is a statistical event and it is fully dependent on the pigment. Luminova is strontiumaluminiumocide containing europium and dysprosium (SrAl2O4:Eu2+,Dy3+). Edited September 14, 2007 by Cosmo Link to comment Share on other sites More sharing options...
TeeJay Posted September 14, 2007 Report Share Posted September 14, 2007 Not sure if it's of any help, but I've found that I get best results when I charge lume with an LED torch rather than a regular light bulb. Link to comment Share on other sites More sharing options...
P4GTR Posted September 14, 2007 Report Share Posted September 14, 2007 All my watches, the ETA Sub, 177H, and gen TAG lume all suck. The tag is alright, but its no superluminova. I hope my SFSO is nice (should arrive anyday). its advertised as "outstanding lume". Link to comment Share on other sites More sharing options...
Chronus Posted September 14, 2007 Report Share Posted September 14, 2007 I took my Omega Seamaster GMT (white dial) with me to Sweden and Finland last December (for the GMT functionality) and I was on a cruise ship from Stockholm to Helsinki, with no windows. A good night's sleep and waking up in the morning around midday, in the inky darkness, the only light shining from the Seamaster dial, and looking real bright... now that's lume Link to comment Share on other sites More sharing options...
Kollektor Posted September 14, 2007 Report Share Posted September 14, 2007 Not sure if it's of any help, but I've found that I get best results when I charge lume with an LED torch rather than a regular light bulb. +1. I used LED toches for 1 minute on the dial and it fully charges the lume. Better than anything else I've used before. Link to comment Share on other sites More sharing options...
maxmilian Posted September 14, 2007 Report Share Posted September 14, 2007 Just read yourself trough this PDFs and you will know it http://navigater.na.funpic.de/PDF/ Greetings Navi Just saw you site with offers great !! Good luck with the buisness Link to comment Share on other sites More sharing options...
Corgi Posted September 14, 2007 Report Share Posted September 14, 2007 All I got was that I had to excite my watch for it to lume brightly. For me this might be tricky... its usually the other way around; my watches get me excited! Link to comment Share on other sites More sharing options...
Victoria Posted September 14, 2007 Report Share Posted September 14, 2007 +1. I used LED toches for 1 minute on the dial and it fully charges the lume. Better than anything else I've used before. OMG. I have to get an LED torch/flash light stat! Only thing is, I don't go to Home Depot or Ace, etc. Will your normal local US supermarket carry them? @Kollektor: THANKS! I will try that out and buy it on *bay. For those interested, here is the torch you can buy: Streamlight PROPOLYMER Link to comment Share on other sites More sharing options...
Cosmo Posted September 15, 2007 Report Share Posted September 15, 2007 (edited) Luminous pigments have usually the strongest absorbance at violet - blue wavelengths (300-500 nm). Blue LEDs works fine, UV-A/B/C lamps mainly even better. Edited September 15, 2007 by Cosmo Link to comment Share on other sites More sharing options...
TeeJay Posted September 15, 2007 Report Share Posted September 15, 2007 OMG. I have to get an LED torch/flash light stat! Only thing is, I don't go to Home Depot or Ace, etc. Will your normal local US supermarket carry them? @Kollektor: THANKS! I will try that out and buy it on *bay. For those interested, here is the torch you can buy: Streamlight PROPOLYMER Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now