klocklind1 Posted December 29, 2009 Report Posted December 29, 2009 I would say that the "new" crowns shall be more recessed YES, BUT NOT as much as the T-crowns because then it would be difficult to make the CG leverarm tight against the crown ( with the crown on the RIGHT distance from the case!). The problem is that some CG:s have to SHORT "arm" so it will not be tight enough against the crown! So somewhere in between is the best I would think !
t Posted December 29, 2009 Report Posted December 29, 2009 you can not build one crown which will perfect on all CG The T-crown is special made for the better CG like the V-CG... but will not fit perfect on the standard reps with standard CG, because the standard CG have to much space between case and CG.
opcrown Posted December 29, 2009 Author Report Posted December 29, 2009 (edited) ok my friends, i make two versions version a recessed 0,55 -0,05mm for other CG who need it... version b recessed 0,85 -0,05mm for gen or V-CG version a-b 2,05+0,02 thick SS / PVD M0,9 / M1,2 THX Edited December 29, 2009 by opcrown
klocklind1 Posted December 29, 2009 Report Posted December 29, 2009 ok my friends, i make two versions version a recessed 0,55 -0,05mm for other CG who need it... version b recessed 0,85 -0,05mm for gen or V-CG version a-b 2,05+0,02 thick SS / PVD M0,9 / M1,2 THX Thanks a LOT for that information Will You consider to make the same ones in titanium ?
PAMman Posted December 29, 2009 Report Posted December 29, 2009 ok my friends, i make two versions version a recessed 0,55 -0,05mm for other CG who need it... version b recessed 0,85 -0,05mm for gen or V-CG version a-b 2,05+0,02 thick SS / PVD M0,9 / M1,2 THX That's the spirit; thanks.
pdnb Posted December 29, 2009 Report Posted December 29, 2009 +1 for version a with .9mm (auto) Thanks!
bwhitesox Posted December 29, 2009 Report Posted December 29, 2009 Wow this is going to be fantastic.
ar0401 Posted December 30, 2009 Report Posted December 30, 2009 Please, put me down for 2 auto SS for rep CG. Thanks.
Drulee Posted December 30, 2009 Report Posted December 30, 2009 Spring loaded? And when should we start PM'ng you
Kollektor Posted December 30, 2009 Report Posted December 30, 2009 I'll be up for a couple... or more. Spring loaded would be phenomenal. I'm still rocking my original Palp ti crown on my 177H.
Drulee Posted December 30, 2009 Report Posted December 30, 2009 He has just posted over on RG that they will not be spring loaded. I guess that was asking a bit much, considering the price Oh well, at least we have the option of getting them with a shallow dish.
chefcook Posted December 30, 2009 Report Posted December 30, 2009 IMO even if making it spring loaded would double the price it will be worth it!
Drulee Posted December 30, 2009 Report Posted December 30, 2009 IMO even if making it spring loaded would double the price it will be worth it! +1
serotonin Posted January 3, 2010 Report Posted January 3, 2010 Hello ive get 5pcs for 1,2mm please Greetz andy
milesd Posted January 3, 2010 Report Posted January 3, 2010 This is great news and perfect timing considering T is no longer going to produce his crowns. I'd be down for 1 SS and if you make Ti, one of those as well! Again, great news!
R_Squared Posted January 3, 2010 Report Posted January 3, 2010 I'm in as well. When does the ordering starts?
SERGEANT_AT_ARMS Posted January 4, 2010 Report Posted January 4, 2010 Very good to here! Will this strictly be SS or will there be PVD and Ti available at some point?
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now