Jump to content
When you buy through links on our site, we may earn an affiliate commission.
  • Current Donation Goals

1016 Explorer build questions


dutchguy2

Recommended Posts

I started a 1016 build. It is the second time I am building a 1016 and this time it should be a keeper.<br /><br />Got some parts ordered already, like Justin's bezel, TC hand set, Clark 25-22 crystal and a gen 16013 mid case.<br /><br />The case is from 1982 and will come without crystal. Now I am not sure if a plexi will fit this case since the 16013 also came as a Sapphire crystal version at some time.<br /><br />Does any one know if all 16013 cases are good for plexi? Or should I be worried that I got a Sapphir version?<br /><br /><br /><br />

Link to comment
Share on other sites

16013 never came with sapphire. Was always a plexi. 16233 was the sapphire version of that case.

 

I am in the process of the same build (16014 case and a gen 25-22). What did you do for a dial? That is my sticking point right now. Hoping whoppy's dial project comes together as planned. Otherwise am probably looking at NDT's.

Edited by tomhorn
Link to comment
Share on other sites

Are these Yuki dials any good?

http://www.yukiwatch.com/catalog/item/8677844/9637047.htm

I know for a while they weren't, but this one looks ok to me.

 

M, this one's not very good.  It's got balloon-like numerals that are set too far into the dial, and the text isn't proportioned properly.  There's a dial on eBay right now that's considerably better (despite odd fonts), and selling for $110. 

 

Also, 162xx is a completely different case from 16xxx.

Link to comment
Share on other sites

tomhorn/alligoat: Yes, that's the one.  It's not a terrific dial (ingod44 would be better if you didn't need an 'Explorer'), but it has fewer sins than the last Yuki batch.  Some of the fonts remind me of the MBW 1016 dials, actually, so I do wonder...

 

Mr. Doug: What's special about that dial is that it's a gilt.  Worth $2900?  Slightly possible, if you had a correct-year 1016 with a totally trashed dial that needed replacement.  But not likely.

Link to comment
Share on other sites

The one for $110 from Mahand is interesting. He obviously has a connection for dials from the far east. Also sells a good bit of Tudor watches.

 

I'll bet he's also the source of all those horrific red-all-over Tudor Rangers that are always around on eBay.

Link to comment
Share on other sites

I bought one from Ebay Seller Mahand1. I've built a franken explorer based on

 

Gen 1601 case + case back

Gen 1570 movement

Gen 1570 hands

JMB Bezel

Gen crown + tube

Mahand1 Explorer dial

 

Con : Dial OD is too small : 27.5 mm (whereas gen dials are 28mm). So if you look good you'll see .2mm space between dial and inner case rim

Pro  : No alteration to the 1570 movements  (height cannon pinion and same gear)

 

 

http://s543.photobucket.com/user/walra01/media/DSC_0814.jpg.html

 

http://s543.photobucket.com/user/walra01/media/DSC_0777.jpg.html

 

http://s543.photobucket.com/user/walra01/media/DSC_0791.jpg.html

 

http://s543.photobucket.com/user/walra01/media/DSC_0812.jpg.html

 

http://s543.photobucket.com/user/walra01/media/DSC_0804.jpg.html

 

http://s543.photobucket.com/user/walra01/media/DSC_0791.jpg.html

 

http://s543.photobucket.com/user/walra01/media/DSC_0777.jpg.html

 

http://s543.photobucket.com/user/walra01/media/DSC_0768.jpg.html

 

http://s543.photobucket.com/user/walra01/media/DSC_0766_zpsccf63633.jpg.html

Link to comment
Share on other sites

The one for $110 from Mahand is interesting. He obviously has a connection for dials from the far east. Also sells a good bit of Tudor watches.

This dial is from mahand, off eBay. He has someone that refinishes gen dials. I have bought a couple from him. Good, not great.

%5BIMG%5Dhttp://i749.photobucket.com/albums/xx136/jumpope/My%201016/100_3436.jpg

Link to comment
Share on other sites

"What's special about that dial is that it's a gilt. Worth $2900? Slightly possible, if you had a correct-year 1016 with a totally trashed dial that needed replacement. But not likely."

 

+1

 

Imho 1016 Explorers should be black and white...like a Tuxedo Tom Cat.  ^. .^

 

"This dial is from mahand, off eBay. He has someone that refinishes gen dials. I have bought a couple from him. Good, not great."

 

The one on eBay looks better overall (to me) than the Yuki dial except it is a bit too 'creamy'. What kills the Yuki dial is the imploding numbers...but the next one may be different.

Buying aftmkt dials is a roll of the dice.  :pimp:

Link to comment
Share on other sites

Preacher62, looks like yours is 28mm whereas mine is 27.5mm.

 

What case did you use?

This is the case that jmb has sold which is sort of unique in that it is made for the 2824. He also drilled it and made the bezel.

I think it makes a pretty fair 1016. Nothing is right, as has been demonstrated by the great authority, LHOOQ, except a gen 1016 case. Therefore, you will have one that is too thin or too thick. the 1016 case is somewhere in between your 1600 case and a 16200 case.

%5BIMG%5Dhttp://i749.photobucket.com/albums/xx136/jumpope/My 1016/100_3436.jpg

%5BIMG%5Dhttp://i749.photobucket.com/albums/xx136/jumpope/My 1016/1016onbackondesk-resized.jpg

%5BIMG%5Dhttp://i749.photobucket.com/albums/xx136/jumpope/My 1016/1016onbackonrock-resized.jpg

I do not understand why our pics are not showing up but rather the links.

Edited by preacher62
Link to comment
Share on other sites

Preacher62 : I can't see a pic at all when I double-click, hope mine do....

 

Thanks for the info!

 

  • I considered buying a Yuki dial but I think they are yellowish but has the right diameter. (28mm)
  • NDT 1016 dials are all 29mm but I don't like the non gilt dials. And too pricy !!
  • Ingod44 dials are too small 26,5mm but to me look very good. for long time they are in back order
  • Mahand1 dials are 27,5mm and look very sharp and clean, with a loup you can see the lume has been applied/refinished in a sloppy way 

So I can live with the Mahand1 dial for the moment, but eventually I will swap with a better one and with the right diameter.

 

Somebody here used  a 1018 case for building a franken Explorer 

Link to comment
Share on other sites

This is one I got from TrustyTime. I replaced the movement with a Swiss ETA I pulled from a vintage Rado. After drilling out the lug holes and aging the dial and crystal, I was in business.

post-53458-136717280489.jpg

post-53458-136717282133.jpg

The dial was real nice, and the whole watch with an Asian ETA clone is only $20 more than a lot of the dials I've seen.

Just a thought. ..

Link to comment
Share on other sites

Guys, forget the mahandi dials from eBay, they are a tiny bit too small, it doesn't fit my case (others had no problems with it, depends on the case you use). And the print color is a bit off, it's not white but rather a creamy color, that is ok for a vintage one but not for me.

 

If someone wants it send me a pn...

Link to comment
Share on other sites

Guys, forget the mahandi dials from eBay, they are a tiny bit too small, it doesn't fit my case (others had no problems with it, depends on the case you use). And the print color is a bit off, it's not white but rather a creamy color, that is ok for a vintage one but not for me.

 

If someone wants it send me a pn...

 

I originally had this dial in a jmb case, a month or two ago I scored a 16013 case and the mahand dial was almost too big. I drilled out the lugholes out as well and have to admit it makes a very nice 1016.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...
Please Sign In or Sign Up