hiker01 Posted August 22, 2014 Report Share Posted August 22, 2014 Ordered this very recently from one of our TD.....got the QC Pics, everything looks good, I approve....shipping was fast, but alas..... When you screw the crown in, the freakin movement stops after 10 minutes......after buying and owning close to a hundred of reps and working with them sometimes, I know the cause was a "little long stem" - meaning it was not trimmed properly.......... and if you release the crown 1 turn the watch works fine..... You could notice the gap....it's that shiny tube......Grrrrrrrr! \ Something an idiot QC person would catch! What a sham! Link to comment Share on other sites More sharing options...
GenTLe Posted August 22, 2014 Report Share Posted August 22, 2014 Yeah, but ok, not a great problem to remove the stem and short it 1 mm or so, correct? Link to comment Share on other sites More sharing options...
Ezio Posted August 22, 2014 Report Share Posted August 22, 2014 Yeah, but ok, not a great problem to remove the stem and short it 1 mm or so, correct? As my good mate here say not a hard fix and what Can you ask for mate its a rep not a gen to 3k expect some flaws and error Link to comment Share on other sites More sharing options...
Rolexman Posted August 22, 2014 Report Share Posted August 22, 2014 So what. Get over it. With more than 5K posts and as an old time vet you should know better. There were times QC pics did not even exist and you never knew what was going to turn up on your doorstep. This is all part of the rep game. It's a small fix...compared to a scratched dial or hands that could turn up in the past. Link to comment Share on other sites More sharing options...
gran Posted August 22, 2014 Report Share Posted August 22, 2014 Send it back! Link to comment Share on other sites More sharing options...
Mike on a bike Posted August 22, 2014 Report Share Posted August 22, 2014 I had two show up with similar issues all you had to do was wind try to set time and you would know they were screwed up...................... this is marginal QC hey they set time ,wind, screw back in properly and run. Long stem/ keyless on one other unknown yet but most likely stem issue, to hell w/ pics does it go! (not bounced about in shipping issues) Send it back! LOL Link to comment Share on other sites More sharing options...
Tonyyammine Posted August 23, 2014 Report Share Posted August 23, 2014 Guys hes allowed to get mad. I hate when people say its a rep and not a 5k watch. You still spending money its not free. Link to comment Share on other sites More sharing options...
KB Posted August 23, 2014 Report Share Posted August 23, 2014 No it's not free but it is usually a few thousand dollars cheaper. It is a rep and if it is not a glaring fault, or one you can't rectify, why the agro? Ken Link to comment Share on other sites More sharing options...
Nightwatch Posted August 23, 2014 Report Share Posted August 23, 2014 Because for $289,99 You can buy a brand-new Genesis Nitrox React Pro In-Line Scuba Diving Computer Dive Diver Authorized Dealer Full Warranty http://www.amazon.com/Genesis-In-Line-Computer-Authorized-Warranty/dp/B001JYIZCQ/ref=sr_1_2?ie=UTF8&qid=undefined&sr=8-2&keywords=%24289%2C99 or this: LG Electronics 39LB5600 39-Inch 1080p 60Hz LED TV http://www.amazon.com/LG-Electronics-39LB5600-39-Inch-1080p/dp/B00KVLQURA/ref=sr_1_5?ie=UTF8&qid=1408773190&sr=8-5&keywords=tv Of course on the 2nd day the on/off button would just come off the TV and on the 3rd the remote would stop working. After 1 week the screen goes blanc but You don´t return it to Amazon, You carry it to the repair shop around the corner that takes another $290 to fix it.... Naahhh.... I just know that when I buy another rep I must switch the logic button off Link to comment Share on other sites More sharing options...
HaydenM Posted August 23, 2014 Report Share Posted August 23, 2014 If having an elongated stem is all you get then that is the least of worries in reps. You can say that you dislike the lack of QC all you like, or that it should be more reliable, but you're a grown man spending your money how you wish. If you think it could be spent better, then spend it elsewhere. As for it not being free, it is what it is. We know when we buy reps that they're not as reliable as gens. If that's a problem, then don't buy reps. Link to comment Share on other sites More sharing options...
fraggle42 Posted August 23, 2014 Report Share Posted August 23, 2014 I'm with Nightwatch on this one. We all know QC has been getting worse (thanks to ZF), and prices are going up. The only reason QC came about was because the buyers back then were asking for it and complaining about the quality and problems. If we can see prices going up and QC getting worse and say and do nothing they'll just think everything is happy and in the end we'll be receiving bags of broken bits for 50% the price of the gen. If we don't let them know they need to step up their QC, they ain't going to do it. Link to comment Share on other sites More sharing options...
hiker01 Posted August 23, 2014 Author Report Share Posted August 23, 2014 I can't believe 90% of the responders missed the point . All I'm sayin is, if you advertise your QC, you should do it.....end of story. And buyers.....are you guys scared of the TDs that you can't point out the mistakes they do? That's why half the time we're getting crap! Just because we're buying reps doesn't mean we'll take any crap they send us.....especially if they banner it on their website. Please don't give me the BS "You're buying a rep, get over it!" That's absurd! I bought a rep that you said you QC'ed, then I expect it to be at least acceptable. Jeeezzzzzz...... 1 Link to comment Share on other sites More sharing options...
Mike on a bike Posted August 23, 2014 Report Share Posted August 23, 2014 I can't believe 90% of the responders missed the point . All I'm sayin is, if you advertise your QC, you should do it.....end of story. And buyers.....are you guys scared of the TDs that you can't point out the mistakes they do? That's why half the time we're getting crap! Just because we're buying reps doesn't mean we'll take any crap they send us.....especially if they banner it on their website. Please don't give me the BS "You're buying a rep, get over it!" That's absurd! I bought a rep that you said you QC'ed, then I expect it to be at least acceptable. Jeeezzzzzz...... + 1 Link to comment Share on other sites More sharing options...
Mike on a bike Posted August 23, 2014 Report Share Posted August 23, 2014 Because for $289,99 You can buy a brand-new Genesis Nitrox React Pro In-Line Scuba Diving Computer Dive Diver Authorized Dealer Full Warranty http://www.amazon.com/Genesis-In-Line-Computer-Authorized-Warranty/dp/B001JYIZCQ/ref=sr_1_2?ie=UTF8&qid=undefined&sr=8-2&keywords=%24289%2C99 or this: LG Electronics 39LB5600 39-Inch 1080p 60Hz LED TV http://www.amazon.com/LG-Electronics-39LB5600-39-Inch-1080p/dp/B00KVLQURA/ref=sr_1_5?ie=UTF8&qid=1408773190&sr=8-5&keywords=tv Of course on the 2nd day the on/off button would just come off the TV and on the 3rd the remote would stop working. After 1 week the screen goes blanc but You don´t return it to Amazon, You carry it to the repair shop around the corner that takes another $290 to fix it.... Naahhh.... I just know that when I buy another rep I must switch the logic button off True also, at the prices we pay at the least engage crown and made sure it works properly for pete's sake. Link to comment Share on other sites More sharing options...
LadyWatch Posted August 23, 2014 Report Share Posted August 23, 2014 (edited) I can't believe 90% of the responders missed the point . All I'm sayin is, if you advertise your QC, you should do it.....end of story. And buyers.....are you guys scared of the TDs that you can't point out the mistakes they do? That's why half the time we're getting crap! Just because we're buying reps doesn't mean we'll take any crap they send us.....especially if they banner it on their website. Please don't give me the BS "You're buying a rep, get over it!" That's absurd! I bought a rep that you said you QC'ed, then I expect it to be at least acceptable. Jeeezzzzzz...... +1 Sent using Tapatalk Edited August 23, 2014 by LadyWatch Link to comment Share on other sites More sharing options...
dbane883 Posted August 23, 2014 Report Share Posted August 23, 2014 Its a rep, get over it Link to comment Share on other sites More sharing options...
Bc1221 Posted August 28, 2014 Report Share Posted August 28, 2014 i never expect too much from QC pics honestly. its always been my understanding that the QC picture process was to make sure its the watch you actually ordered and no obvious flaws. i dont expect the dealer to go through every single watch and make sure everything functions as it should. i guess ive just been lucky for the most part except the one time i got a watch that looked completely different than the one i ordered but the same model. not really much you can do about it honestly. recently got a watch with stripped tube. it sucks but its not really worth spending $50 bucks to ship it back and end up in a black hole and me be SOL. keep your expectations low and youll be ok. its sad that we pay a lot of money for watches that show up busted up at times but i guess thats the risk we all choose to take. i usually try to stick with M2M sales from seasoned members but i have had to order a few from china and its always a worry until it shows up. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now