rolojack Posted January 9, 2017 Report Posted January 9, 2017 Here is a build based on a cartel 6263. The insert was removed and replaced by a Vietnam insert. The movement was CLEANLY converted to reposition the 6 o'clock hand. I could not resist finishing the top plate with a perlé... Even if no one will see that. Dial is from Viet nam WITH feet installed for the Venus 75. Revarnished to be more resistant and not get damaged on the edges, relumed and index finished with black enamel as it should. No glue here !!!! All clean and tidy inside out. I can't stand chewing gum finished watches.... Subsidiary hands are from DW as cartel hands are too large for my taste. Gen 700 crown, and cartel pushers modified to look like first generation pushers. Cherry on the cake: retailed by Hermès..... so we reach the half million ! 4
newswire Posted January 9, 2017 Report Posted January 9, 2017 Never noticed black enamel ed markers on the gen before. Good to know. Sent from my iPhone using Tapatalk
TheSociety Posted January 9, 2017 Report Posted January 9, 2017 Wow now THIS is dope!Sent from my iPhone using Tapatalk
edgematic1 Posted January 9, 2017 Report Posted January 9, 2017 53 minutes ago, Sogeha said: I love the Hermes touch Yes! Great work as always.
rolojack Posted January 11, 2017 Author Report Posted January 11, 2017 I'll rework the pushers to get closer to this. I need to create a bevel. Funny how you need to do things first to notice more details.... 1
Nanuq Posted January 11, 2017 Report Posted January 11, 2017 Screw the bevels, any piece that old will not have sharp bevels, especially out at the ends of the pieces that get the most buffing from shirt sleeves.Look instead at the lugs and the gap where the end links fit. Those are darn sharp edges there. Think about 40 years of wiping it on your pants or shirt sleeve... those would be a little rounded over. Same goes with any sharp edges anywhere.Great piece! 1
Dlf Posted January 11, 2017 Report Posted January 11, 2017 9 hours ago, rolojack said: I'll rework the pushers to get closer to this. I need to create a bevel. Funny how you need to do things first to notice more details.... The Mk1 pushers are my favorite, extra long and fat 1
rolojack Posted January 11, 2017 Author Report Posted January 11, 2017 yeah... I won't get the length. But I can match the teeth profile! At least I will try. 1
rolojack Posted January 16, 2017 Author Report Posted January 16, 2017 Cartel with non oyster pushers? Nice! I didn't know there was one as as far I could see the only available case made by the cartel is a 6263. Could we see more please? Especially the pushers side! 1
TheSociety Posted January 16, 2017 Report Posted January 16, 2017 Cartel with non oyster pushers? Nice! I didn't know there was one as as far I could see the only available case made by the cartel is a 6263. Could we see more please? Especially the pushers side!The case above is a Yuki / Tonny case. Cartel does make a 6241/6239 pusher case but it's the same as atheist 6263 just with the pump pushers so the opening for the pusher is too large and hence, incorrect.Sent from my iPhone using Tapatalk
Accutronitis Posted January 23, 2017 Report Posted January 23, 2017 What movements are you guys using in both of those ?
Champagnesky Posted January 23, 2017 Report Posted January 23, 2017 Great workSkickat från min iPhone med Tapatalk
prdk Posted January 30, 2017 Report Posted January 30, 2017 Looks beautiful! Nice touch Hermes.......
slay Posted February 28, 2017 Report Posted February 28, 2017 Really nice work on the pushers! You are one of the 2 or 3 people who I would let work on my watches!Sent from my iPad using Tapatalk
JSebWC Posted March 7, 2017 Report Posted March 7, 2017 Fantastic! Sent from my iPhone using Tapatalk
Fedefendi Posted April 7, 2017 Report Posted April 7, 2017 Hi Nice watch...how is possible to male the reposition of the 6 hand? Thanks....Inviato dal mio iPhone utilizzando Tapatalk
rolojack Posted April 8, 2017 Author Report Posted April 8, 2017 the movement top plate is modified with a clean new hole. I actually also do a perlé finish on the plate for the looks... It can't be seen but it's about pride... Then, the needle base gear is modified. 1
calvin951121 Posted April 10, 2017 Report Posted April 10, 2017 managed to done my myself !Sent from my iPhone using Tapatalk
rolojack Posted April 14, 2017 Author Report Posted April 14, 2017 if only the cartel would bother doing it... We could have decent dials from stock instead of paying fortunes on Viet dials!!!! 1
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now