Edge Posted May 10, 2006 Report Share Posted May 10, 2006 Tutorial: How to completely disassemble your watch. First off, this is not a patronisation excercise this is to try and help educate the plethora of begginers that we have. Lots of people ask how to do [censored] bits and that's great that is why we are here to help. But I think that the really basic stuff is covered here, so if you want to open the case and check out the movement or anything like that just check this thread out and it'll be all good. This is a step by step tutorial on how to completely take your watch apart. The test subject watch was the POS SD that you saw in one of my earlier threads, which was bought for this exact purpose, testing and practicing. Howeve I will not be held responsible for anyone screwing up their watch lol, but if you do follow this it's REALLY EASY. I have done this with almost no tools, a very small amount are required. HERE WE GO: First off a quick shot of the case of the watch, with the bracelet already removed, please note that some vintagising was attempted on the dial prior to this hence some smal scratches and also the tea colour: Then in order to remove the caseback, take your caseback remover, or rubber gloves/duck tape, whatever you use and twist, COUNTER clockwise: Hey Presto one removed caseback: Next it's time to remove the crown/stem, this is done by pressing gently on the release, and then again GENTLY pulling out the crown. The release for this asian POS is very small and the release is a different shape from ETA models but general idea is the same. Please take time to notice that this is a POS movement and an ETA would have movement clamp screws instead of this plastic thing. The ETA is easily removed by unscrewing the clamps with a 1.2mm screwdriver, whereas this POS just pops out lol. Next we have to remove the hands. Take a hand remover or a set of tweezers, set the time to 12 so as to keep the date chage in the correct position, and gently pull, they come off reasonably easily. The Dial can be removed from the movement by gently prying the razor blade between the parts, as there is a little glue on it. On ETA models there are no feet so the dial is glued on, a little prying with a blade and it comes off easily. On the Asian efforts there are dial feet that need to be loosened out of place, but that is OVER SIMPLE, it's just a screwdriver and unscrewing the small screws that clamp them in place. Next it is the turn of the bezel assembley. This can be done at any point but I chose now lol. Slip a razor blade between the case and assembley and simply push down. Off it pops. I have taken out the bezel spring and also the O ring but that's immaterial. Next a VERY techincal point, please note this is not for the handless........remove the crystal, on all non MBW vintage models the trick is to........... push it with your thumb lol, told you it was technical. And there you have it a completely dissassembled watch. I have added a couple of pics of all of the parts and also all of the parts and ALL of the tools used. I hope you found this helpfull if not then F*** Y**. It's dead easy just try it honest, if I can do it anyone can. It's a stepping stone in growing the confidence you need to mod your own watch, which believe me is SOOO satisfying, it's a great feeling to know that you have successfully fixe your own watch and not had to send it off to be done. At the end of the day, it's nice to experiment but please be carefull these things are delicate, and PATIENCE is KEY. Don't rush things or you will ruin what was a nice piece lol. Enjoy! Chris 2 Link to comment Share on other sites More sharing options...
cwai02 Posted May 10, 2006 Report Share Posted May 10, 2006 Great guide. Btw, I have no problem disassembling. I just wonder what is the best way to install the hands back? I tried this: http://cgi.ebay.com/HANDS-PRESSER-WITH-BRA...1QQcmdZViewItem but it scratches the hands a little bit. I am not very happy with the result. Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted May 10, 2006 Report Share Posted May 10, 2006 thanx man ! great post !! Link to comment Share on other sites More sharing options...
Edge Posted May 10, 2006 Author Report Share Posted May 10, 2006 Great guide. Btw, I have no problem disassembling. I just wonder what is the best way to install the hands back? I tried this. but it scratches the hands a little bit. I am not very happy with the result. I use a set of tweezers and A LOT of patience, it takes awhile but I get there in the end lol. It can be VERY frustrating. I would love for soemone to enlighten me as to a better method also lol. Chris Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted May 10, 2006 Report Share Posted May 10, 2006 hey edge i can do all that pretty well except when it comes to re-installing the hands thats when i usualy screw up .. any tips on re-installation of the hands .. Link to comment Share on other sites More sharing options...
Richard Tracy Posted May 10, 2006 Report Share Posted May 10, 2006 Great ! Thanks much Edge,...and Perfect timing as well.... I have a sub in transit that I was going to put an eta into.... Appreciate it ! Link to comment Share on other sites More sharing options...
V Posted May 10, 2006 Report Share Posted May 10, 2006 Excellent step by step info.. Thanks a lot Chris... Link to comment Share on other sites More sharing options...
tutima Posted May 10, 2006 Report Share Posted May 10, 2006 (edited) Very informative post. Thank you. I might try it some time on one of my old Sub. Edited May 10, 2006 by tutima Link to comment Share on other sites More sharing options...
tech Posted May 10, 2006 Report Share Posted May 10, 2006 Chris, Thanks for the post. I have been wanting to take apart one of my babies for awhile now and I just might be able to attack it...thanks to your help. cheers Link to comment Share on other sites More sharing options...
dabom Posted May 10, 2006 Report Share Posted May 10, 2006 first of all, it's "tid bits" not "[censored] bits" - or was that a freudian slip? Link to comment Share on other sites More sharing options...
jkerouac Posted May 10, 2006 Report Share Posted May 10, 2006 This is great stuff. Thanks. I just received a few more tools, and I have a couple of dead or "very cheap" reps that I can play with. Unfortunately my eyesight is not that great, so I have problems with really small parts, so I don't think I will be advancing to anything much beyond the basics -- but I do see well enough to play with "[censored] bits." Link to comment Share on other sites More sharing options...
Edge Posted May 10, 2006 Author Report Share Posted May 10, 2006 first of all, it's "tid bits" not "[censored] bits" - or was that a freudian slip? No slip, I like [censored], i'm not gonna lie, what's a tid? nothing a [censored] on the other hand, Link to comment Share on other sites More sharing options...
FasTTaP Posted May 11, 2006 Report Share Posted May 11, 2006 usefull post! thank you :-) Link to comment Share on other sites More sharing options...
cornerstone Posted May 11, 2006 Report Share Posted May 11, 2006 first of all, it's "tid bits" not "[censored] bits" - or was that a freudian slip? In the UK it really is titbits! It's tidbits in the US. Chambers Link to comment Share on other sites More sharing options...
KB Posted May 11, 2006 Report Share Posted May 11, 2006 Yeah I like it..........in fact I like it so much I think I'm going to have to pin it. Ken Link to comment Share on other sites More sharing options...
Edge Posted May 11, 2006 Author Report Share Posted May 11, 2006 In the UK it really is titbits! It's tidbits in the US. Chambers Why Thank you, Bloody Yanks changin OUR language again eh? jees oh! Link to comment Share on other sites More sharing options...
Edge Posted May 11, 2006 Author Report Share Posted May 11, 2006 Yeah I like it..........in fact I like it so much I think I'm going to have to pin it. Ken Much appreciated Ken, Nice to be recognised lol. I believe that makes me 2 for 2 on the pinned tutorial front.......WOOHOO!..... Thanks Again Hope you guys find this useful and who knows I may even write a "Now I have a load of bit's, How the hell do I put them back together?" Tutorial lol. Chris Link to comment Share on other sites More sharing options...
KB Posted May 11, 2006 Report Share Posted May 11, 2006 Hope you guys find this useful and who knows I may even write a "Now I have a load of bit's, How the hell do I put them back together?" Tutorial lol. Yeah well if you do I will stick it on to the end of this one so we will all know how to put the bloody thing back together Ken Link to comment Share on other sites More sharing options...
Edge Posted May 11, 2006 Author Report Share Posted May 11, 2006 The annoying thing was that the watch was in bits for soem other stuff I was doing, I put it back together so that I could write this tutorial and never thought to write the other one while I was putting it together. Would have been weird writing the "Putting Humpty Back Together Again" Tutorial before I have even taken humpty apart, officially lol. Chris Link to comment Share on other sites More sharing options...
cornerstone Posted May 11, 2006 Report Share Posted May 11, 2006 I may even write a "Now I have a load of bit's, How the hell do I put them back together?" Tutorial lol. With all our watches now in a million pieces, that would make you a popular man! Thanks for your great post. Link to comment Share on other sites More sharing options...
KB Posted May 11, 2006 Report Share Posted May 11, 2006 Delete Link to comment Share on other sites More sharing options...
Edge Posted May 11, 2006 Author Report Share Posted May 11, 2006 This post is a secret....Shhh Ken WOOHOO!!!!! I vote for...... ME!!! That's 2 now...c'mon I gotta win.....PLEASE!!! Link to comment Share on other sites More sharing options...
Guest Watchandpen Posted May 13, 2006 Report Share Posted May 13, 2006 The annoying thing was that the watch was in bits for soem other stuff I was doing, I put it back together so that I could write this tutorial and never thought to write the other one while I was putting it together. Would have been weird writing the "Putting Humpty Back Together Again" Tutorial before I have even taken humpty apart, officially lol. Chris Definitely looking forward to instalment II: "Putting Humpty Back Together Again". If it's as good as the first, it will be fab! Thanks again. I shall try that with a cheap Asian YM I got a year back. As it's not working, it'll be ok if I can't put it back. Cheers. Link to comment Share on other sites More sharing options...
Pugwash Posted May 13, 2006 Report Share Posted May 13, 2006 Why Thank you, Bloody Yanks changin OUR language again eh? jees oh! Your language? Bloody Scots claiming English as their language. Link to comment Share on other sites More sharing options...
Pugwash Posted May 13, 2006 Report Share Posted May 13, 2006 Top secret..........eyes only He only writes part 2 if he wins that fancy watch. Gun to your heads. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now