dutchguy2

Insert, I don't think so. The 2's are different.

Very nice. This is exact the reason I like the 1016 so much. Understatement!

Thanks Whoop. Nice to read every detail you can share with us.

Just paid. Thanks for the opertunity!

Sorry :-( won't happen again.

1. 1x 1680 red mk 3 - Aero_Dave 2. 1x 5517 - torresp 3. 1x 5514 – torresp 4. 1x 5514 - torresp 5. 1x 1680 red mk 3 - Wiesn089 6. 1x 1016 - tomhorn 7. 1x 1680 red mk3 - dropbear2008 8. 1x 1016 - dropbear2008 9. 1x 5514 comex (26.5mm, tropical finish) - DocThor 10.1x 1016 - dieselpower 11.1x 5514 Comex - dieselpower 12. 1x 5517 - rower 13. 1x 5514 comex - rower 14. 1x 1016 - CptTripps 15. 1x 1680 red mk 3 - CptTripps 16. 1x 5514 Comex - dutchguy2 17. 1x 1016 - dutchguy2 18. 19. 20.

The right one.

I think you will need a different case first. If I recall correct from memory this case does not take important gen parts like dial and crystal.

2836-2. Wear it in good health my friend.

Yes, I see but this is because this dial has the SWISS - T<25 higher tha on most of the 1016 dials. LHOQQ Gen 1016 has this same dial like some other Gens. Mine: LHOQQ Two other gens

I agree on the diameter J but what do you mean with the SWISS - T<25 is to far away from the rehaut?

Thans guys. Dial is Ingod44 and case, bezel is JMB's.

Here are some daylight pics: Yes, it is just a fraction of a mm. If you want to get rid off yours let me know. Want one to relume with some lighter color lume.

It is just Sunday here, can't choose.

Get a gen insert and call it a day.

Here it is again!

Haha, it s allready fixed. Just needed to glue it back on. Still, not very peasant if it happens to some one who is not that handy to glue it back on. But thank you for your comments. It is indeed a very nice watch. Alltough the dial is a tiny bit to small for the case and very hard to fit correctly.

That was untill I dropped it! Ingods dial is not that good!

Build details, JMB case and bezel, clark crystal, 2846 movement, yuki hands and ingd44 dial.

Tritec Superluminova C1 with some "Kreide" to mix the right color and very important is the binder, I only use Tritec binder.

I did my best. Here is the dial when I was working on it.

Thanks S.

Glad you like it Doc. Suites you well.

First one has had an upgrade to a new insert. Snapped a gen one of ebay real cheap. Makes a hell of a difference. Will start the next build next week. I am sure it will get better than this one. I learned a lot with this one.

Thanks for the update.