lanikai Posted March 4, 2010 Report Share Posted March 4, 2010 If you had a request to correct one issue with ALL dealers ... what would that be ?? keeping in mind, that this thread is intended to be constructive, and "realistic".. and not aimed at any one dealer nor group of dealers.. Perhaps some of our trusted dealers will view this thread.. and some of the comments.. ya never know..aside from rotors falling off and the normal QC issues.. what can we "help" with as far as comments ?? AC/Lani Link to comment Share on other sites More sharing options...
Dani Posted March 4, 2010 Report Share Posted March 4, 2010 My biggest request would be serviced movements and better lume but that i think is a factory issue not dealers, i cant say i have any request for all the dealers.. Link to comment Share on other sites More sharing options...
TwoTone Posted March 4, 2010 Report Share Posted March 4, 2010 My biggest request would be serviced movements and better lume but that i think is a factory issue not dealers, i cant say i have any request for all the dealers.. I would agree with Dani on this... And although it is indeed a factory issue, I'm sure that the major dealers have a fair amount of influence with them ;-) Link to comment Share on other sites More sharing options...
kamber Posted March 4, 2010 Report Share Posted March 4, 2010 General QC, I mean if they want more business they need to look after their customers, and make sure that what they are providing is value for money and everything is as it should be, everything works correctly etc. IMHO they should all have a pressure tester and test the supposedly water proofed watches themselves before sending them! Obviously QC is to their advantage because they will end up with a [censored] off customer, and have to sort the problem out. Anyway there are some good dealers out there who obviously understand that looking after customers will get them repeat business. Personally I can only vouch for 1 "dealer" which is Josh, he's been top notch with me with my previous purchases, and I will be ordering from him again in the future. My other reps are from other forum members so far. Well the other dealer non watch dealer though is KB he's a top bloke too, got a few things off him so far and just getting some more at the moment. Had a slight issue with 1 item, but it wasn't his fault as it was shipped directly from the supplier so I got it quicker (what with the CNY n all). He's sorted that out now without a problem. Link to comment Share on other sites More sharing options...
Ronin Posted March 4, 2010 Report Share Posted March 4, 2010 I am going to go out there a bit and say, better 'country' specific shipping options. It would be nice, if there were North America/CONUS, EU, etc, "ship from" centers. Maybe middle men. Probably a logistical nightmare, given drop shipping etc. Just wishful thinking. Link to comment Share on other sites More sharing options...
Agrippa Posted March 4, 2010 Report Share Posted March 4, 2010 As Dani said, serviced movements (as an optional extra at least) and better lume are the things I want the most. I also agree with Ronin that logistics centres would be nice, although I'm sure it won't happen. Not so much because of the shipping out, as for when a watch has to be returned. I've yet to experience any problems requiring the return of a watch, but if I did I would be seriously hesitant in shipping it back to China, both because of the time it takes and the chance of it disappearing down a black hole. Link to comment Share on other sites More sharing options...
TeeJay Posted March 4, 2010 Report Share Posted March 4, 2010 Although I'm normally satisfied by factory lume and movements, I would agree with Dani, that an improvement in those things could only be an improvement on what there is now Link to comment Share on other sites More sharing options...
asf Posted March 4, 2010 Report Share Posted March 4, 2010 I am starting to see some dealers starting to offer better lumed reps from the factories but I would love that Link to comment Share on other sites More sharing options...
Utheman Posted March 4, 2010 Report Share Posted March 4, 2010 I would like to see better and more acurate lume application. Not sure about QC and movement servicing as I think that would tend to drive the cost up too much for me. Link to comment Share on other sites More sharing options...
Mercury Posted March 4, 2010 Report Share Posted March 4, 2010 I would ask for a reliable Seconds at 6 movement, but the number one thing that I would love to see is a 1:1 Rep of the Speedmaster Professional. If they could super-rep this then I would be the happiest man in the world. Link to comment Share on other sites More sharing options...
mastrmindalliance Posted March 4, 2010 Report Share Posted March 4, 2010 Just better lume, I'd still have to have the ones i like serviced for piece of mind. Link to comment Share on other sites More sharing options...
Dani Posted March 4, 2010 Report Share Posted March 4, 2010 i think all see a trend here for what is asked, reliability of a movement..It should not cost to much, because just some simple steps can add a lot for this China clone movements.. Spare parts are also i big request from me and that dealers can give easy access to it, that way its more easy to fix a broken movement by yourself. Link to comment Share on other sites More sharing options...
pollux1 Posted March 4, 2010 Report Share Posted March 4, 2010 +1 Dani. The only thing I could add, let's say in the case of the up and coming 42mm PO, can they get it right? [censored] if they do they'll sell in their thousands over all the boards, let alone out in the wild. At some point even the dealers must see that if we're willing to have watches shipped over the globe to be "right" then we'll pay a premium if they can do it for us. Verifiably so I may add. Link to comment Share on other sites More sharing options...
By-Tor Posted March 5, 2010 Report Share Posted March 5, 2010 Two biggest flaws on reps are badly applied lume and sloppily fitting SELs (imho). Even some WM9 products have crappy SELs. Why is it so difficult to make them fit properly? Dealers... I only use Precious Time (UK) because I'm European and I can only praise his service and communication. I also have great experiences of Joshua who has always been helpful and friendly to me. Maybe one thing... dealers who QC the watch and photograph the actual watch that you're going to receive are great. PT does that for me every time. Link to comment Share on other sites More sharing options...
jeff g Posted March 5, 2010 Report Share Posted March 5, 2010 No drop shippers, wouldn't that be nice. A photo of the actual watch your buying...that would be nice too. Lume, sure...but how about no misaligned markers and bezels. Not too much to ask. Link to comment Share on other sites More sharing options...
fijikid Posted March 5, 2010 Report Share Posted March 5, 2010 My reps hand delivered by exchange students. And a packed in frozen dumplings. Oh yeah, and working. Link to comment Share on other sites More sharing options...
By-Tor Posted March 5, 2010 Report Share Posted March 5, 2010 My reps hand delivered by exchange students. And a packed in frozen dumplings. Oh yeah, and working. Well that sounds reasonable. Actually now that you mentioned it, I wouldn't mind my reps being delivered by young blonde naked women. Link to comment Share on other sites More sharing options...
fakemaster Posted March 5, 2010 Report Share Posted March 5, 2010 Am I correct that you'd want to pay the same prices? Link to comment Share on other sites More sharing options...
pedecter Posted March 5, 2010 Report Share Posted March 5, 2010 Am I correct that you'd want to pay the same prices? Well actually, why not ask for better lume, perfect alignment, serviced movements, pics of the exact watch in advance and no PP fees and lower prices as well? Isn't that how it works outside the world of reps? Link to comment Share on other sites More sharing options...
beanyboy Posted March 5, 2010 Report Share Posted March 5, 2010 How about better inventory control? Like if you don't have the freakin' watch in stock, either remove it from your site or have an entry that says "Out of stock." I get tired of asking if the watch is available...just tell me upfront whether or not it is ... Beanyboy Link to comment Share on other sites More sharing options...
fakemaster Posted March 5, 2010 Report Share Posted March 5, 2010 Well actually, why not ask for better lume, perfect alignment, serviced movements, pics of the exact watch in advance and no PP fees and lower prices as well? Isn't that how it works outside the world of reps? RMFAOL! Link to comment Share on other sites More sharing options...
StormTooper4 Posted March 5, 2010 Report Share Posted March 5, 2010 Crowns and tubes that screw down and stay screwed down. A stripped tube and crown can ruin an otherwise good watch very quickly. Link to comment Share on other sites More sharing options...
thogaa Posted March 5, 2010 Report Share Posted March 5, 2010 QC - Don't send out broken stuff please IC - Don't show it if you don't got it. - "Thank you for your money, now please pick something else" Link to comment Share on other sites More sharing options...
sul Posted March 5, 2010 Report Share Posted March 5, 2010 QC. Link to comment Share on other sites More sharing options...
mbjoer Posted March 5, 2010 Report Share Posted March 5, 2010 QC for sure. In particular have the watches pressure tested. There is no bigger tell then having to take off a sports watch to aviod it getting wet. This test would not cost much, but avoid considerable additional costs afterwards. Also (although this may be an issue for makers rather than dealers) get proper straps. Rep straps suck. And it should not be nessecary to pay more for the strap than for the watchhead. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now