watcher Posted September 17, 2012 Report Share Posted September 17, 2012 Today after record delivery time(sat posted and delivered today to UK!!) I received my 3135 clone from Yukiwatch. It was well packaged in plenty of bubble wrap. This is how it arrived after opening. Here is shot without rep DW and then a pic with it fitted and working perfeclty! Then came the fitting of the dial which was no problem and has little screws to secure the dial feet in place. Next the hands. All go on without any issue whatsoever!!. One thing to note and this may be the case on a genuine 3135 but the canon pinions are stepped so that the hands sit perfeclty in the right place! impressed with that I must say! I never had an early version of this movement and have not got a genuine 3135 stem but there is no thin section on this stem to break! Here are a couple of pics in the case. I will let you draw your own conclusions as to whether this is an updated version but it seems to be working well and does not appear to have the issues of the ealry movement. The dial and hands brings this watch alive though!! Here is a side by side pic of my WM9 V3 set up. Link to comment Share on other sites More sharing options...
watcher Posted September 17, 2012 Author Report Share Posted September 17, 2012 Sorry first pic is wrong! Link to comment Share on other sites More sharing options...
woof* Posted September 17, 2012 Report Share Posted September 17, 2012 That's really cool! Link to comment Share on other sites More sharing options...
chiman12 Posted September 17, 2012 Report Share Posted September 17, 2012 Thanks for the pics W! It looks like the stem has been improved! It'll be interested to know the reliability of the movement as compared to the SA3135 and if it fits a gen date wheel. Link to comment Share on other sites More sharing options...
coolfire Posted September 17, 2012 Report Share Posted September 17, 2012 Wonderful! Now I need a modern Sub. Link to comment Share on other sites More sharing options...
woof* Posted September 17, 2012 Report Share Posted September 17, 2012 No markings, I wonder if a gen rotor will fit and work? Link to comment Share on other sites More sharing options...
chiman12 Posted September 17, 2012 Report Share Posted September 17, 2012 The stem also looks really close to the replacement 3135 stems that WSO sell, I wonder if they can be used as replacements... Link to comment Share on other sites More sharing options...
irolexu Posted September 17, 2012 Report Share Posted September 17, 2012 Do they plan on launching the new improved version with better markings? Awesome build though! Link to comment Share on other sites More sharing options...
aeromatic Posted September 17, 2012 Report Share Posted September 17, 2012 Well i must say that looks great! that is fastest delivery and review i ever saw! no doubt they are getting better (movements) for me i would not go to the expence even if i could afford it for a gen movement unless i was building with all gen parts and it was a rare model so 200usd sounds great to me can they supply engraving 3135 ect? Link to comment Share on other sites More sharing options...
watcher Posted September 17, 2012 Author Report Share Posted September 17, 2012 It fits a genuine date wheel. Link to comment Share on other sites More sharing options...
woof* Posted September 17, 2012 Report Share Posted September 17, 2012 I wonder if this fits 1 Link to comment Share on other sites More sharing options...
Ephry73 Posted September 17, 2012 Report Share Posted September 17, 2012 Thanks brother! That is great to hear. Thanks for sharing the pictures. Did the movement fit the gen case screws? Tight tolerances against your sub case? E Link to comment Share on other sites More sharing options...
watcher Posted September 17, 2012 Author Report Share Posted September 17, 2012 I have used some eta screws until my rollie screws arrive from cousins Wednesday. The heads are a bit small so only just securing under the lip for now. The movement fits fine and theorem aligns perfectly central in the tube hole! I have however discovered a problem with the movement, when changing the date manually it is fine but at 12 it changes over in 2 day jumps instead of the next day! Any ideas??? Link to comment Share on other sites More sharing options...
freddy333 Posted September 17, 2012 Report Share Posted September 17, 2012 I wonder if this fits You read my mind. Link to comment Share on other sites More sharing options...
mellons Posted September 17, 2012 Report Share Posted September 17, 2012 Gen rotor? Link to comment Share on other sites More sharing options...
Ephry73 Posted September 17, 2012 Report Share Posted September 17, 2012 I have used some eta screws until my rollie screws arrive from cousins Wednesday. The heads are a bit small so only just securing under the lip for now. The movement fits fine and theorem aligns perfectly central in the tube hole! I have however discovered a problem with the movement, when changing the date manually it is fine but at 12 it changes over in 2 day jumps instead of the next day! Any ideas??? [censored], that's not good. Could be the day jumped has the wrong spring? Or maybe the date wheel is the wrong one? Link to comment Share on other sites More sharing options...
automatico Posted September 17, 2012 Report Share Posted September 17, 2012 "I have however discovered a problem with the movement, when changing the date manually it is fine but at 12 it changes over in 2 day jumps instead of the next day! Any ideas???" Maybe not enough tension on the the little 'pointer' that locates the date, shown between 12 and 13 in the top date wheel pics and between 5 and 6 in the lower pic. Should not be hard to fix. The first batch of genuine 3035 had this problem but it is not made like the 3135. The movement looks good. I have a few 152xx and 162xx cases, dials etc that have been parted out...maybe get a couple of these movements and fire them up. I could give my wife one just to see how rugged they are. 1 Link to comment Share on other sites More sharing options...
Ephry73 Posted September 17, 2012 Report Share Posted September 17, 2012 Is it an easy fix? That is a good thing to know. It will be interesting to see how many of these movements end up in discarded DJ and old DDs that were sourced for the gen movement. I can definitely see a resurgence of these watches if this movements proves good enough. E Link to comment Share on other sites More sharing options...
kbh Posted September 17, 2012 Report Share Posted September 17, 2012 I assume you were using gen hands also? I don't believe anyone before has actually confirmed that. Link to comment Share on other sites More sharing options...
watcher Posted September 17, 2012 Author Report Share Posted September 17, 2012 Sorry, yes they are gen hands I will look at the spring on the date thingy! Thx Link to comment Share on other sites More sharing options...
Ronin Posted September 17, 2012 Report Share Posted September 17, 2012 Hey gang, been away for a bit. To clarify- Does this movement: Fit gen dial feet locations Fit gen cases Use gen hands Thanks 1 Link to comment Share on other sites More sharing options...
watcher Posted September 17, 2012 Author Report Share Posted September 17, 2012 Fits gen dial, hands, date wheel not sure about stem until Wednesday when I will have one to try but looks close on pics. I cannot stop looking down at the dial at those beautiful gen hands and dial smiling at me!!!:-) Link to comment Share on other sites More sharing options...
red series 3 Posted September 17, 2012 Report Share Posted September 17, 2012 I have used some eta screws until my rollie screws arrive from cousins Wednesday. The heads are a bit small so only just securing under the lip for now. The movement fits fine and theorem aligns perfectly central in the tube hole! I have however discovered a problem with the movement, when changing the date manually it is fine but at 12 it changes over in 2 day jumps instead of the next day! Any ideas??? Are you saying that if you advance the date when the hour hand is at 12 this was something I did not think was a good idea. I am sure It says in the manual for my gen sub. That you can do damage to the movement. If you manually advance the date between the hours of 9 and 3. If I am setting the time I usually move the time to 6 to set the date. Link to comment Share on other sites More sharing options...
watcher Posted September 17, 2012 Author Report Share Posted September 17, 2012 No that is not what I mean buddy. The date advances 2 days under normal operating when the time reaches 12 and it changes over automatically. When I change the date via the crown only after 6am and before 3pm it changes one day only. It is as if the spring tension that changes the date automatically is too strong an flicks it 2 days rather than just the next date. Link to comment Share on other sites More sharing options...
amespinosa Posted September 18, 2012 Report Share Posted September 18, 2012 nice review.. i might take the plunge also for this one.. going to use this for my 16234 build 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now