kingkitesurf Posted August 9, 2006 Report Share Posted August 9, 2006 I was so stupid as to release the stem out of my ETA 2836-2 with to small a pushpin (first time I did this). The push button did not come back up (and I supose it should pop back up). I now cannot put the stem back in... That was dumb. Is there a way to fix or can I throw away the movement now... It is a shame because it is the GMT adjusted version with the correct hand stack...For my White Explorer2... I was going to paint the hour markers black... Link to comment Share on other sites More sharing options...
Pugwash Posted August 9, 2006 Report Share Posted August 9, 2006 I was so stupid as to release the stem out of my ETA 2836-2 with to small a pushpin (first time I did this). The push button did not come back up (and I supose it should pop back up). I now cannot put the stem back in... I did this. You need to get it fixed. I used Palpatine, but I believe Finepics can do it as well. If you fancy fixing it yourself, you need to be comfortabble removing the hands, the dial and a few bits of the movement. I took one look and decided to sent it off. Link to comment Share on other sites More sharing options...
leitztozeiss Posted August 9, 2006 Report Share Posted August 9, 2006 I did the same thing. It's a simple fix for a watchmaker. It has something to do with screwing up the keyless works (I think). Don't worry - just take it to your local rep-friendly watchmaker. Link to comment Share on other sites More sharing options...
dachshund Posted August 9, 2006 Report Share Posted August 9, 2006 It can be fixed, but you will probably have to pull the movement, hands and dial, then get into the keyless works on the dial side to the movement. Unless you are comfortable with working on movements, you'll need to find a repairman. Link to comment Share on other sites More sharing options...
supermanx Posted August 10, 2006 Report Share Posted August 10, 2006 I did the same thing. It's a simple fix for a watchmaker. It has something to do with screwing up the keyless works (I think). Don't worry - just take it to your local rep-friendly watchmaker. Hey lietz have you found a local rep friendly watchmaker? I may have, but I have to check him out friday, i need a cyclops installed. Lee Link to comment Share on other sites More sharing options...
kingkitesurf Posted August 19, 2006 Author Report Share Posted August 19, 2006 Fixed it.. As a matter of fact it is quit easy but I had to remove hands and dial. With the help of Bazz and his super macro pictures it all worked out... Thanks man... This forum is great... My TWG white explorer2 is up and running again... Post pics soon... Link to comment Share on other sites More sharing options...
Usil Posted August 19, 2006 Report Share Posted August 19, 2006 Post the pics of how this was fixed. That is what everyone whats to see. Usil Link to comment Share on other sites More sharing options...
Bazz Posted August 19, 2006 Report Share Posted August 19, 2006 (edited) kingkitesurf was determined to do this himself and rather than have him going in blind I just gave some basic instructions. Heres pretty much the PM that I sent. Once the dial, hands and hour wheel are off the movement will look like some thing below. The first thing is to remove the date wheel which is held in by the parts indicated by the red arrows. The spring part shown by the blue arrow needs to be moved towards the centre of the movement, I use a very small screw driver to do this. The date wheel then should be rotated till the teeth line up with the green arrows and it should come out. Because we will be going into the keyless works you probably can just undo the screw between 6 and 7. Now the date wheel is off it should be similar to this, next is to remove the screw at the red arrow. This piece is also held in at the green arrows and just needs to be moved down in relation to the picture. The next pic relates to the keyless works, the piece out of place is shown by the white arrow (it will probably be slightly raised). The reason its out of place is because the button on the opposite side of the movement that you pushed to far is on the other side at the red arrow. Now hopefully you can move this piece very slightly so it drops back in place with out having to remove any more parts as there are a few small bits in the keyless works that have to go together in a particular way. As you can see in this pic the button has a slot for a reason and thats not to push to far, only use a screw diver that fits in the slot! (ignore the red arrow) Edited August 19, 2006 by Bazz Link to comment Share on other sites More sharing options...
Bazz Posted August 20, 2006 Report Share Posted August 20, 2006 Heres a post to try and show what happens when you do happen to push the set lever button to far. Heres a pic pointing out the part that becomes the problem, the set lever. This is what the keyless works looks like with the cover removed. Here I have flipped the set lever over so you can see underneath it. The arrows are to show how it lines up. The middle part goes into the groove of the stem (bottom middle arrow). When you push it through to far from the other side you push the set lever button up out of its hole so the whole set lever is sitting up out of position. This in turn means that the stem can not grip the button part of the set lever meaning the stem will be able to be pushed in or out without engaging the rest of the keyless works. Hope this helps I know I have done it in the past! Link to comment Share on other sites More sharing options...
700club Posted August 20, 2006 Report Share Posted August 20, 2006 Excellent work Bazz. Thank You Link to comment Share on other sites More sharing options...
Bignasty Posted August 20, 2006 Report Share Posted August 20, 2006 Very informative post Bazz! I've had to do this once too. Love when people are willing to share great knowledge and pics with the rest of us! Glad you got your watch fixed too Kingkite! Cheers, Jon Link to comment Share on other sites More sharing options...
marrickvilleboy Posted August 20, 2006 Report Share Posted August 20, 2006 very good post Bazz! a hand for him everyone! btw, remember guys, when you release the stem, use a screwdriver size 60 or 80 to push down, anything else and you'll run into issues like Kingkitesurf did. Link to comment Share on other sites More sharing options...
kingkitesurf Posted August 20, 2006 Author Report Share Posted August 20, 2006 Actually you can't go wrong with it in IMHO. There's a few things you have to be carefull about.. - Get people like Bazz to help you - Take a good look before you start disaasembly (take pictures beforehand) - Have good screwdrivers and tweezers - Don't turn the watch upside down to remove something (I did and then had to puzzle out ho to get the parts back), better peel it of gradually - Just go ahead and do it, if you manage it's great Link to comment Share on other sites More sharing options...
Bazz Posted August 21, 2006 Report Share Posted August 21, 2006 (edited) Thanks for the nice comments guys, seems to be a common problem thats easily avoidable with the right screw drivers. Edited August 21, 2006 by Bazz Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted August 21, 2006 Report Share Posted August 21, 2006 awsome BAZZ Link to comment Share on other sites More sharing options...
KB Posted September 21, 2006 Report Share Posted September 21, 2006 Bazz has done me a good turn on an occassion too, he is a real credit to our community. Thanks B Ken Link to comment Share on other sites More sharing options...
alligoat Posted September 21, 2006 Report Share Posted September 21, 2006 Great post, Bazz! We'll have to start referring to you as Ziggy II. The pics are magnificent. Like everyone else who starts working on watches, I, too, have screwed up the keyless works. Luckily, my watchmaker fixed it for $30. And of course, since then I've started using the 1.2mm screwdriver. Link to comment Share on other sites More sharing options...
2005SUBMARINER Posted September 21, 2006 Report Share Posted September 21, 2006 (edited) i know this sounds crazy but i have a spare eta 2836 laying around some where , im going to sink the pin & try to reset it i think i can pull this off ! .. but BAZZ how do you remove the dial on a eta 2836 movement ? & re-install it . its not as simple as asian movements are . Edited September 21, 2006 by 2005SUBMARINER Link to comment Share on other sites More sharing options...
Linder Posted September 21, 2006 Report Share Posted September 21, 2006 Ever crash your car so you can rebuild your engine? I think you will need to remove the dial but with ETA it will be very simple. Link to comment Share on other sites More sharing options...
leitztozeiss Posted September 22, 2006 Report Share Posted September 22, 2006 Best explanation I've seen. Thank you. This really should be a sticky in the repair section - it happens SO often . . . well, to me at least. Link to comment Share on other sites More sharing options...
kingkitesurf Posted September 22, 2006 Author Report Share Posted September 22, 2006 To me it happened once and that was beginning of Aug... as you can see with this post... obviously this happens all the time although there is a warning in various posts. I didn't have the patience to wait for the correct screwdriver and used a needle... Luckily I have read the warnings in advance and did not push very hard in trying not to overpush it but you will anyway.... That way you don't bend anything... Use the screwdriver and it is peanuts now. I have by now uncased all my reps a few times. Routine comes very quick. This should be pinned in the repair section indeed.... Link to comment Share on other sites More sharing options...
rqthrottle Posted September 22, 2006 Report Share Posted September 22, 2006 This has also happened to me on my Pam 063 the third time or so I worked on it. I actually used a watchmaker screwdriver and still managed to sink it! I feel a little relieved to see that some other members have done this, as I thought I was the only one. Mine will be going to The Zigmeister to have it fixed and serviced. My confidence level working with watches has plunged after this fiasco Link to comment Share on other sites More sharing options...
ubiquitous Posted October 11, 2006 Report Share Posted October 11, 2006 Bazz- That is a great write up on resetting the clutch/keyless works on the ETAs! It's great contributions like these that make the forums so great! Best, R Link to comment Share on other sites More sharing options...
Muttsta Posted October 11, 2006 Report Share Posted October 11, 2006 Just find a watchmaster in your city who's cool on working with reps I suggest looking for smaller watch/clock shops Just ask him if he minds, then explain your problem My watchmaster was so impressed with the quality of my reps that he was acutally thinking about me ordering a few for him, lol Link to comment Share on other sites More sharing options...
sssurfer Posted October 11, 2006 Report Share Posted October 11, 2006 it happens SO often . . . well, to me at least. To me it happened once and that was beginning of Aug... This has also happened to me on my Pam 063 the third time or so I worked on it Same here. My watchmaster was so impressed with the quality of my reps that he was acutally thinking about me ordering a few for him, lol Exactly the same here. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now