preacher62

Pardon my ignorance, but what is this BP? I have been around here for 4 or 5 years but that seems to be new terminology to me.

That is an MBK case and I think you need a 3mm. I put the crystal in mine so long ago that I really do not remember. Seems like another member on this board recently got a clark crystal with a 2.5mm gasket and then went to a 3mm to make it right.

Wouldn't touch it...

I was thinking that it looked good, as well. I keep buying the insert that WSO has on their eBay site, but when I receive it, it does not look the same as the one on the site. I think he has a pic of a gen 16610 modern insert on the site but is selling the same thing as everyone else. Also, according to ByTor's reviews of the day (about 4 years ago), the Noob dial and hand set was one of the best around. It can't measure up to some of the dials we have today.

The Euromariner was a watch that Chris, with Eurotimez (a trusted dealer) assembled when he was in business. The Euromariner was an MBK case with a Noob dial and hands and a Clarke crystal. Not sure what bracelet he used but I think it was the MBK bracelet. I've seen folks refer to a Euromariner case, so this is what it is. A great case for a 2836 movement.

I purchased a TC SL dial and SL hand set and the lume of the hands do not match the dial. Dial is wonderful...hands are...kinda wonderful.

It just depends on what your objective is. If someone asks you, "is that watch a real Rolex?," what are you going to say?

It helps, when using a 2824 to polish down the screw head that holds the minute train bridge. It usually has a pretty good slot in it so you can take it down a good bit. That relieves a lot of the pressure from the dwo. I like using the 16000 cases with a 2836. Just fewer problems. I tried to build a 1601 and finally gave up. Never could get it to work well.

When measuring a wheel (i.e canon pinion or 4th wheel) from a 2836-2 or 2824-2 to determine the height, do you measure the full length of the shaft or do you measure from the gear to the tip of the shaft? IOW can you just put the entire wheel between the blades of the mic to determine what is the H number? I know someone will answer this. Thanks in advance!

I'd pay a good bit for a bracelet like that. How is it made...out of TC stuff, I mean. I can't figure out how to take one apart without serious damage.

I ordered TCs bracelet combo and compared the V2 clasp to the V3 clasp. IMHO the V2 clasp is superior...especially the fliplock. I put the V2 clasp on the V3 bracelet. On my MBK case I was stunned. There has been more complaining (here) about endlink fitment than anything else. The TC V3 endlinks fit the lugs on the MBK case like gen. Shape is perfect and I have the links so tight that it is waterproof between the endlink and the lug...lol I'll post pics. I had given up my 16610 for vintages, but I had jmb drill the lugs and I purchased an SL dial (combo kit), hand set and DWO V2 from TC and voila. I think I will wear it a little.

Also, send an email to Andrew, at Trusty. He will source just about anything you need. If you can show it to him on one of his watches...he will get it. He sourced for me a superb jube a couple of years ago.

+100

Are you sure that you have the correct email address. I purchased some parts from him that I should have on Saturday and he has responded in one day each time that I emailed. I emailed him on yesterday morning and he responded this morning. It is usually one day. tc670207@gmail.com M

+1 The old Noob coronet is better.

Look at the bracelets on Long Supply Co. They have both 14K and 18K bracelets. The TTs run $500 to $600. If you get a solid gold one it can run $2000. It's an ounce or two of gold. What do you expect? You might have to use a rep clasp if you want the Rolex coronet on it. http://longsupply.com/rolex_watch_bands.htm

If it was free I would take the movement and put it in a super franken and throw the rest away.

Thanks! Think I'll try to get an SL dial and hand set from either TC or BK and move on.

Thanks P153. I will look for a 93150 but will probably go ahead and source a dial and hands and use it with the 250 that I have for now.

Thanks to all. I just really love the vintage pieces...like this... Until I can build a decent 1680 then I guess I'll get by with the 16610 Thanks, again for your advice and help.

Thanks! That's what I'm thinking. I know that the subject of 93150s has been kicked to the wall and back on this forum but is there a pretty good rep 93150 from any of our TDs. I have two from Josh, but they have that flat piece that goes into the endlink and it just doesn't look right. Gens are curved a little going into the endlink.

It is a 1:1 case/bezel design. I use a gen spec Clark crystal on it. As I have looked at the 800s on eBay, it just seems as though the bezel teeth are shorter and not as well defined as the 16610...sort of like the Noobmariner bezel. I would love to build an 800 on this platform. Below was the watch before I robbed the insides for my son. I added the gen tube and crown...703.

I have had this MBW 16610 for 4 years but I took the insides and put them in another case for my son, for Christmas. I sent the midcase to jmb for drilling and just received it back. I have been watching, with interest, the threads regarding the 16800 builds. That was my original plan for the case, but in looking at the 800s on eBay it seems that the MBW bezel...and bezel teeth...are just not right for an 800. So, now, I am trying to decide what to do with the case. Were there any early LVs that had drilled lugs?

I'll take that PAM today... Get me one.

Ok...thanks to all. One more question. Would a drilled lug case have been used on an early LV. I have watched the Bay and have not seen one. I have had an MBW 16610 for 4 years and I just received it back from jmb, with drilled lugs. I have been watching, with interest, the threads regarding the 16800 builds. That was my original plan for the case, but in looking at the 16800s on eBay it seems that the MBW bezel...and bezel teeth...are just not right for an 800. So, now, I am trying to decide what to do with the case. I took the insides and put them in another case for my son, for Christmas.