Tribal

All I can say is fantastic work and a beautyfull watch You did a great job. Is it a MBW/MBK Case as base?

You can go with a MBW 1680 Case, it is mostly signed 5513 inside the Lugs. Or you can go the cheaper way and buy a Sillix Vintage Sub,also a good base for a 5513 Project. It's your choice

I would go for reluming the markers and matte varnish

Nice one, wear it well. Every time a pleasure to read about building a nice watch.

I saw this one also on the bay. But markers are a bit too shallow in my opinion.

What can I say Ubi, fantastic watch. I climbed in too late. But I saw its a WM9. I build a similar for W.Genzo and Stephane in the past. The idea for the SEL are damn good because the WM9 ones are really good in my opinion. Fantasic work as allways.

Ups, that looks really bad Wish you all the best Rob and that it will be fine again...

So here we go The Case is 38mm in Diameter from Lug to Lug 46mm Height is 12,7mm The Brass Bezel Retaining Ring is 33,7mm Outer Diameter is 38,5mm Inner Diameter is 33,7mm Bezel Height is 2,7mm Hope this helps

Comes from Jojo I think its a MBW/MBK Gilt Dial

Send it back and you will see what happens....

Fantastic Comparsion Many thanks for that Great Pics also

Really nice one my8

Thanks mate, I still wait for a answer for a Tudor one from MBW.... We have a nice project in the pipeline

...and here the Gen for reference

haha Frank, ever the same story Here are some Dial shots to make you fuzzy Relumed it and made some Varnish on it to become the old look Too bad it's Lazarinis watch

So, this one comes like this Justasgood 5513 Now it turned like this

I think the SEL's on the older massive MBW Bracelet was the best Installed on a watch they look superb. Here a comparsion... Noob left , MBW right

Looks like there is only some glue or varnish on the pearl

I have done it on V1 and V2..... You need a thin knife or anything else to do it.. Put the blade under the gap between case and Bezel. Try to lift a bit and then go around the bezel and lift it more. After this it comes off.. But be carefull otherwise you bent the Bezel... Needs some force but it works

I think its never good to share this in public

Thanks to all.... This is how the caseback really looks Thats is a old MBW SD about 3 years old As you can see a lot of work on it... The Dial is relumed and has some varnish on it Dateoverlay is a Watchmeister one and rotates fine ... Most of the parts are Gen

Thanks, damn, there is some polishing Dirt on the engravings on the caseback The Paint is allready off....

Here is my Great White Needs the right caseback.........

Picture update if you can see in the Pics the CG's are now updated also Crown etc....