Nanuq

solstice

I make it a point to get together with him every time I go to Hawaii. He's crazy busy so no, he never checks in here anymore. Remember that Doxa SUB 300T we all chipped in for when he was in the hospital? He wears it every time. What a great brother.

Hot dog

*snorts coffee out his nose*

The one I worry about is Miss Understood. Does the old bat dear still lurk these hallowed halls?

Does anyone remember our own brush with infamy? Remember....... "Jetmid"??? He was our very own rich kid with private jets and expensive watches and hubris out the wazzoo.... and we had a lot of fun at his expense.

Welcome back! It's nice to see the other old timers in this thread too.

When I was building my Snowflake (Phong case) it would leak like that. Upon CLOSE inspection I found the "flat" area on the midcase where the caseback o-ring seals was deformed. It was bulged out a smidgen, probably when someone tapped threads into the new tube hole during manufacturing. I had my guy machine that flat and that let the caseback come in a bit further and get the right squeeze on the o-ring.

Maybe the huge steaming pile of bear scat detracted from the ambiance?

Woodstock

Stripper

I posted a picture of my gen 1665 over on VRF and got a reply "bad dial and hands". I don't go there much anymore, there's nothing to learn.

Windmill

That's the spirit! I thought I'd built an admirable 6538 until a couple guys here, when pressed, pointed out things I never even saw. That led me down a better path. One more tiny detail, count the "teeth" on a gen 8mm crown vs. the Athaya crown. That's an arm's length visual that's pretty easy to pick out. You can refer back to my two earlier photos.

Hitchhikers Guide to the Galaxy

Here are some better photos of 702 and 703 crowns courtesy of Ubi. They're wrapped the same way as the 8mm so this is the look you're after.

That's a beautiful result. That said, never say never ... just when you think it's done something else comes along. Look at the "case" side of your 8mm crown. See how smooth it is? A gen crown has thin stainless wrapped over a brass form, and you can see the rough edges on the inner face. I'm sorry I don't have a better picture, but here are two to show what I mean. I bet you could take some jeweler's tools and scribe the inner face of your crown to make it look more like the gen piece. With your skills it shouldn't be hard at all. Athaya crown Gen crown

Pecos Bill

Peter

In that picture, the bear is definitely demeanor of the two.......

Don't send it to Alaska yet, my aim isn't quite good enough with my Anaconda. That might make it the terminal end of its voyage.

Land Rover

This will do it.

Roger that. I personally think they should make it without the date function. How often do you need to know the date while diving?

Baby seal