mymanmatt

Probably brushed to make it look better. My wife uses different color file boards for her fingernails. They come in white(very coarse) blue, yellow, and pink(very smooth) My guess is they used the white. You can use a new pink board and it looks almost factory. They work very well for puting a satin finish on bracelets, try it.

True irolexu, very true

Always remove the stem when it's in the set time position( all the way out) never in the wind position. Support your palm, and as you apply a gentle outward tug on the stem, slightly and I mean slightly, push down on the pin untill you feel the stem move outward. When you reinstall it, gently push it back in while slightly rotating it untill it reaches the wind position. Do not push the release pin down when reinstalling.

100% asian, I am sure

Daily beater, 2836-2 swiss eta. You can beat it and beat it, but you can't kill it

As a matter of fact we will have some pictures of a couple of builds were doing in the upcoming week. They will be picture heavy. So tune in and see what happens, Oh, and the best part, FREE ADMISSION

What kind, datejust, president, submariner, daytona etc etc

In order for an eta to fit it, you will have to cut the movement ring down, its a little to fat for the1500 case. Depending on the year of you case, you will have to use a 2824-2 or a 2846 old style. Probably 2824-2 because it is hacking and high beat. If you are using a gen dial, ck your overlay before you do anything, I don't think it will line up with your dial date window. I don't think I have ever seen an overlay for a 1500 series dial, but I could be wrong. good luck

It's just the picture, dial feet are there. So the dial and bezel and insert are proper for a 16610 early model? We were thinking only a 16800

100% genuine, no doubt. Question is ,16610 16800 or something else. best pics at this time. Not trying to sell, just determine what they are for.

also, do they got together, or are they for 2 completly different watches.

The one thing I know for sure is that these are genuine. The dial is not great, but ok, the bezel is a bit worn and the insert looks pretty good. My friend and I cannot determine for sure what they are for. On the back of the dial are the numbers 21 with a space and then the numbers 1311 below that are the numbers 0823. The insert presses into the bezel, it is not glued in. Thanks for the help The pearl glows slightly, the dial does not

I've been building and servicing rep watches for 25 years. I have seen the rep watch quality go from extremly poor to astonishing. Along the way I have encountered nearly every problem you can imagine. Here are some tips to help you with your build. Keep in mind there are dozens of cases of each model, and none of them are the same. These are a couple of things to look for during your build that apply to any watch anywhere. First, it is critical that the stem, when the movement is mounted in the case, is dead center, "and I mean dead center", of the case tube. By doing that you can ensure your movement will give you long, trouble free service. Second, be sure your movement mounting ring fits your case properly, no side to side movement. Third, be sure you have proper clearance under the crystal for your sweep second. hand. Fourth, before installing your date wheel overlay, mount you dial on the movement to make sure your date window is aligned with the number on the stock date wheel. If not, adjust you dial to align properly so it will have the proper bulls eye when finished. Fifth, mark you overlay with a small black dot on the center of any number you choose, at the outer edge of the overlay. Then align the black dot with the center of the stem as you attach it to the movement. When aligning the overlay, try not to move it backwards, as this will sometimes move the stock date wheel out of position, causing misaligment during normal operation. These are just a couple of tips to help along with your build. As we all know there are dozens of things to look for when building a watch. If you have any questions during your build pm me and I will try to help. Good luck to you all

I have 2. The older style with the rather flat end pieces and the later style with the rather curved end pieces. They both have 2836-2 eta movements. My email is matthew.wright@sbcglobal.net

The tension spring does not keep it from wobbling. Make sure your steel bezel is not up on 1 side. Sometimes they fail to be pressed down evenly all the way around, You should certainly ck that to make sure. Even the slightest bit up on one side of the steel bezel will cause a wobble. Beyond that, who knows

No that won't help, the baseplate is different, that's what affects the stem position

As you may or may not know, I build watches. If this watch looks as good in person as in the pics, I am very Impressed. That is how a vintage rep should look after the build is completed. I relly like clarks crystal, perfect for that watch. Two thumbs up on this one

I must say that even with the stem height being off. .005 is not acceptable. I don't know if it's up or down .005 but you need to correct it. If it's down and you have the room to use a thinner dial spacer, do that. If it's up try a thicker dial spacer. The stem must be dead center of the case tube to insure trouble free service from your movement. Even if you don't have problems in the begining, it will be just a matter of time before problems occur with the operation of your watch. Hope this helps, and good luck

Everyone has avoided the obvious. It's quite possible the bezel was bent during removal. Remove it and lay it on a flat surface, it it wobbles that is your problem, seen it happen before. Even without the tension spring, it should rotate evenly. The tension spring keeps the bezel at the proper height to avoid draging on the case. Hope this helps and good luck.

Have you cked your steel bezel to make sure it is level all the way around, good luck

I always place a small drop of oil on the yoke and yoke corrector when I service an eta. That very very small drop will find its way to the stem, do not be concerned, it will eventually disappear and cause no harm.

Arthur, I'll call you today around mid morning and we'll discuss those issues you emailed me about, and also a remedy for this one.

Hey authur, there are actually a couple of different calender wheels, ( date wheels) for that model. They changed position over the years and became more consistant over the past 20 years. If the zigmeister put it together like that,shame on him. The overlay may have shifted if he used one

I'd wear the 16610 every day, and save the 1680 , just so you could admire it from time to time.

Really hard to tell in a picture. I can tell you what I've noticed with a gen and aftermarket crystal. In my hand the gen crystal, etched or not, it feels buttery smooth, the aftermarket feels sharp. I call it the touch test, for me it really works. You don't need to look at it, just feel it, you will see what Im talking about.