Original Scope Posted December 18, 2010 Report Share Posted December 18, 2010 As promised, Here are the pics of the Yuki case which arrived in 5 freakin day. I've never been that lucky before. Note the He valve and I added a gen crown. Let me know what you think. Hope this will give others helpful info.Thanks for the help guys. Link to comment Share on other sites More sharing options...
freddy333 Posted December 18, 2010 Report Share Posted December 18, 2010 You go, girl! Link to comment Share on other sites More sharing options...
cib0rgman Posted December 18, 2010 Report Share Posted December 18, 2010 Do mind telling how much was the case if you do not mind. Thanks Link to comment Share on other sites More sharing options...
coolfire Posted December 18, 2010 Report Share Posted December 18, 2010 Looking great! btw, was the HeV an option with additional cost, on top of the caseset, may I ask? Link to comment Share on other sites More sharing options...
highoeyazmuhudee Posted December 18, 2010 Report Share Posted December 18, 2010 not bad. id go with a more period correct crown, but thats just me. did you check the HEv for leaks? Link to comment Share on other sites More sharing options...
Dizzy Posted December 18, 2010 Report Share Posted December 18, 2010 The complete case set is about $500. Did the movement fit ok? Any issues? dizz Link to comment Share on other sites More sharing options...
olreon Posted December 18, 2010 Report Share Posted December 18, 2010 hello, the 1665 yuki case set has following flaws, - the rehaut is totaly wrong - the crownguard needs to get reshaped - bezel is wrong - edges of the lugs are wrong olreon Link to comment Share on other sites More sharing options...
Rolexaddict Posted December 18, 2010 Report Share Posted December 18, 2010 hello, the 1665 yuki case set has following flaws, - the rehaut is totaly wrong - the crownguard needs to get reshaped - bezel is wrong - edges of the lugs are wrong olreon on the pics the case doesn't look better than a 98 US$ See Dweller from Josh Link to comment Share on other sites More sharing options...
Star69 Posted December 18, 2010 Report Share Posted December 18, 2010 on the pics the case doesn't look better than a 98 US$ See Dweller from Josh +1 really don't get it - why $500 ? sorry Link to comment Share on other sites More sharing options...
FxrAndy Posted December 18, 2010 Report Share Posted December 18, 2010 hello, the 1665 yuki case set has following flaws, - the rehaut is totaly wrong - the crownguard needs to get reshaped - bezel is wrong - edges of the lugs are wrong olreon When you say wrong can you elaborate a little, ie too big/small/fat/thin/shape, The finer points some times escape the noobs and me as well Link to comment Share on other sites More sharing options...
Original Scope Posted December 18, 2010 Author Report Share Posted December 18, 2010 The case was $500.It included the he valve. The bezel does not bother me considering there were so many different ones. http://anonym.to/?http://forums.timezone.com/index.php?t=msg&th=1265550&start=0&rid=15726 Took all gen parts like a champ.When I complete the build I will get it pressure tested. I do plan on modding the crown but I think I will let this one age on its own. Link to comment Share on other sites More sharing options...
coolfire Posted December 18, 2010 Report Share Posted December 18, 2010 A little wasted that the pearl seems a little too much to the left. Link to comment Share on other sites More sharing options...
coolfire Posted December 18, 2010 Report Share Posted December 18, 2010 The case was $500.It included the he valve. The bezel does not bother me considering there were so many different ones. http://anonym.to/?http://forums.timezone.com/index.php?t=msg&th=1265550&start=0&rid=15726 Took all gen parts like a champ.When I complete the build I will get it pressure tested. I do plan on modding the crown but I think I will let this one age on its own. Thanks for the info on the HeV, USD500 together with it sound good. Yuki wanted to charge me extra , previously when I last checked. Well, the important thing here is that you are happy with your purchase, and subsequently, build. Working the CGs will go a long way, IMHO.... and letting this beauty age naturally is a good decision too...especially if she is a keeper. Wear her in great health, mate! Link to comment Share on other sites More sharing options...
Original Scope Posted December 18, 2010 Author Report Share Posted December 18, 2010 Thanks, It seems that Yuki will haggle exept on case cost. Link to comment Share on other sites More sharing options...
alligoat Posted December 18, 2010 Report Share Posted December 18, 2010 When you say wrong can you elaborate a little, ie too big/small/fat/thin/shape, The finer points some times escape the noobs and me as well The lugs are too fat, IMO The bezel is too deeply notched The crown guards need to be reduced on both sides and maybe shortened You can fix the lugs and the crown guards and maybe the bezel isn't too bad when you compare it to this one from Robt Maron Maybe sanding down the bezel to soften it would help- we're talking about 40 yrs of wear- old bezels tend to be fairly smooth if the watch has been used at all. Link to comment Share on other sites More sharing options...
chiman12 Posted December 18, 2010 Report Share Posted December 18, 2010 This must be the second generation Yuki cases, because the first gen had an improper thin bezel, but everything else was more accurate, including the CG's. The case back engravings seem a little thicker also, but it could be the effect of the macro shot. Link to comment Share on other sites More sharing options...
rosnik Posted December 18, 2010 Report Share Posted December 18, 2010 IMO: I think this case is really good. The insert problem is easily fixed replacing with a GEN one. Link to comment Share on other sites More sharing options...
freddy333 Posted December 18, 2010 Report Share Posted December 18, 2010 Like all aftermarket parts, Yuki's case is not perfect, but those sins can (for the most part) be mitigated with a bit of judicious effort. If you want a slightly better case, try Phong's, which, as I recall, will cost you roughly 3 times the Yuki case & will still need a bit of work Link to comment Share on other sites More sharing options...
automatico Posted December 18, 2010 Report Share Posted December 18, 2010 It looks pretty good to me but I am not much of a 'bezel watch' guy so I am not boned up on detail differences between genuine and aft/mkt cases. What I can do is put this watch in perspective... Since this case is $500, what else is available for $500? Not much. Maybe another 'oem spec' case from another vendor with different flaws, some maybe worse. Maybe a case made for an eta that could be modified to work with a 1570/75. Then you usually have the non oem style crystal retaining system and a lot of other troubles to contend with...the oem spec dial being too small, having to machine the case for the movement screws or case clamps etc, etc. Maybe you could go with a 1680 rather than the 'dweller and maybe have fewer 'flaws' but not have the gas valve. Then again, the gas escape valve is the one feature that makes the 'dweller very special. How about the 'tells' that mark the 'dweller as a replica? First off, most people will never know the difference (including me) and if I had this particular $500 case and a 1570/75 with a good dial...I would be happy. After all, how close to a 1970's 'dweller case is a genuine rolex replacement 'dweller case from the 1990's? Maybe this 'dweller case looks like some of the genuine replacement cases. Who knows for sure? Not me of course. As for the infamous replicator's 'one step forward, two steps back' routine when they make cases... Business as usual imho. How else can they keep selling the same thing over and over? Without a doubt, they could get it right on the first try if they wanted to. I guar-an-damn-tee I could get it right if I had the equipment they have. If you posted pictures of a genuine 'dweller' case, you would probably still get comments on what is wrong with it...more on VRF and other 'rolexpert' forums than here I am willing to bet. That's just the way it is. I have seen 'rolexperts' at watch shows point out flaws with various original rolex watches that have never been anywhere other than the AD's showroom and a dresser drawer. What could I say...they were 'experts', not me. What I am getting at is this...I like the case and a few finishing details should bring it up to a high percentage of original in appearance. I like it! Link to comment Share on other sites More sharing options...
FxrAndy Posted December 18, 2010 Report Share Posted December 18, 2010 If you posted pictures of a genuine 'dweller' case, you would probably still get comments on what is wrong with it...more on VRF and other 'rolexpert' forums than here I am willing to bet. That's just the way it is. I have seen 'rolexperts' at watch shows point out flaws with various original rolex watches that have never been anywhere other than the AD's showroom and a dresser drawer. What could I say...they were 'experts', not me. That i can fully belive, we always look to what we think is the normal but we can all be wrong Link to comment Share on other sites More sharing options...
Dizzy Posted December 18, 2010 Report Share Posted December 18, 2010 I agree. It looks like a good case for the money. The only other option in that range is MBW and it needs even more work to fit the gen movement. I would never spend $1500 on a Phong case when you can get the Yuki and put a little work into it. We should all have figured out by now that no aftermarket case is going to be "perfect". Thanks for the pics and info. Keep us updated with the build! dizz Link to comment Share on other sites More sharing options...
Star69 Posted December 18, 2010 Report Share Posted December 18, 2010 would be nice to see a shot like this : but from the pics the bezel it totally wrong - same goes to the HEV - and im not speaking about the funky CGs what is so complicated to put the 1570 in an MBW case ? this case is light years ahead IMHO does it even make sense to put an 1570 in a rep-case ? - okay this is off-topic cheers, Frank Link to comment Share on other sites More sharing options...
freddy333 Posted December 19, 2010 Report Share Posted December 19, 2010 would be nice to see a shot like this : Mid case by MBW. Everything else you see is gen Link to comment Share on other sites More sharing options...
panerai153 Posted December 19, 2010 Report Share Posted December 19, 2010 Mid case by MBW. Everything else you see is gen And buddy that is one sweet 1665 :thumbsupsmileyanim: If mine turns out even close to this one, i'll be thrilled beyond words!! Link to comment Share on other sites More sharing options...
freddy333 Posted December 19, 2010 Report Share Posted December 19, 2010 If mine turns out even close to this one, i'll be thrilled beyond words!! All you need is alot of time & money. I did make a mistake in my description - I forgot that the crystal is from Clarks. At that distance, it is nearly impossible to tell it from the gen superdome (which is 1 of the reasons I opted for Clarks). Good luck with your build. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now