Leaderboard

Choices choices...

6204 Verstuurd vanaf mijn SM-A520F met Tapatalk

6542 for 420 Sent from my iPhone using Tapatalk

Sorry no pics. So the other day I had serviced an asian 2836-2. The numbers were great. speed +5 sec, amplitude 280, beat error 0.0. I installed the rotor assy. To my surprise amplitude dropped to 240. After scratching my head for a bit, i found it. 2 screws hold the rotor assy on the baseplate. One is by the balance bridge. To my surprise the bridge on the rotor assy overlapped the balance bridge, slightly. When I tightened the screw on the rotor bridge, it actually put the slightest amount of pressure on the balance bridge. Never saw it before. I cut the rotor bridge back slightly so it cleared the balance bridge. Installed it, and amplitude back to 280. I cked a couple of other asian rotor assy, same thing. That may slowly develop into a bigger problem and may eventually stop the movement. Just thought I would share.

Hello to everyone! Since my recent pictures on my two tone raised some interest I decided to do a quick review of my only gen omega, a Seamster pre bond automatic! This watch was serviced by swatch group (for a total price that I admit is more or less the value of the watch..) before my father give it to me and is rarely worn so it is almost perfect! The watch is 42mm with the crown and approximately 9mm thick and feels really slim. It sits perfectly on my small wrist. The two tone head is adding vintage and cool looks without being too much invasive since it is limited to the head while the bracelet is all steel. The black matte dial is simple and legible with gold markers that match the two tone case and gold hands. The white dateweel has a clean and vintage font. The marker was supposed to be lumed but the lume is almost totally faded, while the hands lume is really strong with make me think they have been relumed or replaced during last service. The peal lume is weak but present. This model could came with rolex like Mercedes hour hand but mine is with stunning sword like hour and minute hand and a beautiful lollipop second hand. The gold bezel bezel is with black inserit and contrast gold numbers. The gold crown matte with polished happy feet omega logo, this one was replaced as well by swatch group since the previous was stripped. The embedded bracelet is awesome and is the peculiar feature of this model. Quite discussed at the time due to the fact that you cannot put a nato or rubber strap now is appreciated and really merge perfectly with the case. The clasp could came with single or double lock and mine is with double lock with diver extension. Now too the pics and wrist shot! Pics Other pics Last pics [emoji3]

Ah hah, I see it now. Going to try and bend the curve in. Let’s see how terribly that goes.

Sunbathing today!

Phfoe never had this problem. Buying a new one will solved the issue for sure Maybe yo can try paint for model building to mask the hairline.

6204 Verstuurd vanaf mijn SM-A520F met Tapatalk

Never been a fan of Rolex in my life....but I changed my mind a few weeks ago.....very nice build this one,

Right, sorry for the delay there. Misiekped had to uh... Fix a movement problem that may or may not have been created by me. Also I'm aware of the scratches on the crown side from hasty sanding - just been too lazy to take it back down and address.

Wow that looks amazing, no wonder you’re pleased! Just hope mine can stack up against that! Just finishes it off to near as dammit perfection [emoji1303] Sent from my iPhone using Tapatalk

That’s too bad. I look fwd to seeing it done when you receive it. I just got my new insert from@tripdog. It’s great and is the finishing touch I finally consider this build done and I could t be happier !! [emoji1317] Sent from my iPhone using Tapatalk

Sent from my Lenovo P2a42 using Tapatalk

Gen dial gen hands gen crown gen bezel Thanks to MMM for his magic!

This just in... after NeckyZips spa treatment. Mated usually with a Ammo strap from my watch brother [MENTION=67006]erick.510[/MENTION].Thanks Fam! Sent from my iPhone using Tapatalk Pro

Sent from my iPhone using Tapatalk

If it's an alligoat recommendation then you've got no worries. Enjoy.

[emoji113] Enviado desde mi SM-N9005 mediante Tapatalk

That is an achievement and a watch to be very proud of. You can scrub the "Noob" from your thread titles now, work like that commands respect

Beautiful! That's one to be proud of.