hiker01

I think 85% of their cases are made to fit the 6497.....so far it has for me!

I'd be very interseted in this too. Mine arrives next week and was planning on greasing caseback and crown but would be interested in results if anyone else has already done this.

I'm not confident in my ability to remove the movement to test on an empty case!

I have two more complete watches coming next week! I'll test them and let you folks know.....you should start thinking

of doing some work on your watches......at least a little bit at a time! Getat watches are cheap, so it's affordable to mess up!

That's why I buy their watches......to play around with!

Goodluck!

Did anyone tested the water resistance of a watch from getat or from jacksontse?

Results?

The two 1st watches I got from them was good to 3ATM,

these:

but the first case leaked around the crystal! This:

came out like this:

But I'm very impressed on there response! Tat sent me a replacement rt away!

113b kinda day...

Nice!!!!

Costeau Day for me:

Lots of PAMs this Monday, so I can't go wrong going back to the 111:

And the wristie:

Thanks for havng these Big Boyz their 5 mins, Lani!

Wearing the SUG again for the weekend! Best Lume I've seen (on it's price range).....last all night long:

Breit for Fri......it's been awhile since this baby saw the outside:

Rueben Sandwich with Swiss Cheese!

Wearing two-five-three 2day!

I ship to China when needed with no problem! Use USPS Priority Flat Rate Small Box, should be around $12.50 online! Declare it as watch Sample and Describe it as Defective watch case~!

Good Luck......!

Ditto!!! Here's the PM!

New arrival

Group: Member Posts: 0 Joined: 17-September 09 Member no. 24900 Sent Today, 01:59 PM

we are professional to sell copies of Rolex watch.

such Datejust Day-Date Daytona GMT-Master II Yacht-Master Submariner Series...

We will guarantee to provide you with high-quality copies. It has first-class quality, first-class appearance, first-class material,and Moderate prices.

As well as the sale of Breitling ,Chanel , Zenith, Omega, Audemars Piguet, IWC , Cartier , TAG Heuer , Longines , Rado ,Patek Philippe watches.

Luxury is often a manifestation and symbol of identity. Sincerely hope that our services can help you gain an immediate victory .

I accept payment by credit card，you can rest assured to buy our products

We are looking forward to hearing from you!

Best regards

www.cheapwatchsales.com

Excellent reply....hack! Hack! Hack!

I think you're an expert!

flat = on caseback, as it is on your wrist on on a desk yes.

Problem = Extra module above movement has gears in to move seconds at 9 to 6. This involves extra gears. Problem is these are not jeweled, just running flat against eachother on the bottom plate of this module. So they will wear out. These extra gears sap power from the drive train of the watch too so it struggles to turn them. Just a bad design.

Fixes -

Service movement, replace crap rep balance = more powerful movement, will keep the watch/extra gears running better/longer.

Remove and strip complete upper module. Clean (ultrasonically) all the gears and plates. Use graphite powder to lubricate them. This allows them to turn a lot easier, reducing friction. So it will turn the second hand smoother and last a lot longer before wearing out.

Say a standard "good" (plenty of crap ones) S@6 lasts 12 months.....service and graphite movement = it lasts double that, 2 years. Hack it every night, that doubles it to 4 years. Only wear it 3 days a week instead of 7, hacking it the other 4 = 5-6 years before crapping out easily imo.

Much oblige, Brah! Enjoy the view!

Check PANATIME.com and use rwg when you check-out to get 10% off!

I think I have the same model as yours!

What I do with all my 7750/chrono watches is to pull the crown out all the way till it stops and then I store after use! So far, DONT JINX ME!!!!!, they're all ok! Don't run your chronos on those that have the se@6 mod! It seems to strain the movement more! Now these are just my style and observation and I am no EXPERT! But, hey, so far so good!

Hike!

I'm with Lani today, Exp IIW:

Cheers, Brah!

Getat offered to take it back and cross ship me a new one! So, off it goes back to HK!

I'm starting to get impreesed by this dealer!

At nearly 100 megs, you will need to rip it.

Ouch! I guess I have to do it!

Thanks!

Try this!

If that won't work, try ScotchBrite and detergent! Soak the case in the detergent for a half and hour, then just scrub gently!

Depends on the effect you want, you could go hard!

This is what I came out with:

Good luck! F-

Got it with Replay Media, which worked like a charm.

Unfortunately, neither of the other utilities did any better than my old packet sniffer, but thanks to all for your help & input.

By the way, this video ought to be required viewing for every single member of this board. If you have not seen it, do.

Thanks, when can we have your captured version!

What's a DSN H ?

It's the PAM111H from DSN! (search DSN!)

BTW: Check the dealer section, I think there's a code you could use at PANATIME to get a 10% discount!

Don't go to a watch store! Check Panatime.com and this site (I've ordered a lot from them) have some really nice cheap

PAM leather straps: http://getat-watch.com

Good luck!

Awesome job, Puggy!

I wish I have half of your Skills, both in watchmaking and photography......you're my new IDOL!